Influence of Asphaltene Aggregation on the Adsorption and Catalytic Behavior of Nanoparticles
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
This study is a continuation of our previous works on the use of metal-based nanoparticles for the adsorption of asphaltenes and its subsequent catalytic thermal decomposition. In this study, we evaluated the effects of asphaltene aggregation on the adsorption process and the subsequent catalytic oxidation using fumed silica and nanoparticles of NiO and/or PdO supported on fumed silica. Adsorption isotherms were constructed through batch adsorption experiments at 25 °C by using mixtures of n- heptane and toluene in amounts of 0, 20% v/v n- heptane (Heptol 20), and 40% v/v n- heptane (Heptol 40) to obtain different aggregate sizes of asphaltenes. Subsequently, asphaltene oxidation in the presence and absence of the nanoparticles was carried out in a TGA/FTIR system to investigate the impact of adsorbed asphaltene aggregates on the catalytic activity of the selected nanoparticles. The adsorption isotherms were described by the solid–liquid equilibrium (SLE) model, and the catalytic behavior of the nanoparticles was compared based upon the trend of effective activation energies using the isoconversional method of Ozawa, Flynn, and Wall (OFW method). The results showed that the K parameter of the SLE model for both nanoparticles followed the trend of Heptol 40 > Heptol 20 > toluene, indicating that, as the amount of precipitant in the solution increases, a higher degree of asphaltene self-association on the active site of the catalysts is found. On the other hand, the H parameter revealed higher adsorption affinities as the n- heptane in the solution increased. However, when different adsorbents were compared at a fixed asphaltene concentration from the same solution, it was found that the use of functionalized nanoparticles led to a lower degree of asphaltene self-association and a higher affinity. A correlation between the effective activation energies from the OFW model and the SLE parameters was developed, finding that, for a fixed adsorbent, E α increases as the affinity and the degree of self-association of asphaltenes increases. However, when the same asphaltenes were compared using different adsorbents, it was observed that E α increases as the affinity decreases and the degree of asphaltene self-association increases. Consequently, this work shows the effect of the adsorption process on the catalytic activity of the nanoparticles. The reported results should give a better context for the use of such nanoparticles for the upgrading of heavy and extra-heavy oil.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle