Fabrication of PVDF- and NMP-Free Lithium Ion Electrodes By Electrophoretic Deposition
Notice bibliographique
Résumé
Lithium-Ion batteries electrodes are fabricated by mixing the active (Li-ion host) and conductive material along with polyvinylidene fluoride (PVDF) and N-methyl-2-pyrrolidone (NMP) which are the binder and solvent respectively. The paste created is then doctor-bladed onto the current collector, convectively heated, and pressed. The problem with this method is that NMP is toxic and expensive and the binder has a limited solubility meaning replacing the solvent has proven difficult. Current attempts to eliminate the solvent have included finding a water soluble binder (such as Styrene Butadiene Rubber, SBR) or developing a new fabrication method. Among the new methods suggested is Electrophoretic Deposition (EPD). EPD is well suited to provide a low cost and green manufacturing technology for LIB battery electrodes thus contributing towards wider acceptance of electric vehicle transportation and renewable energy adoption. Thus EPD research can be very fertile ground in this domain. In particular, EPD systems that can produce thick electrode films using less hazardous solvents can be a major advancement. With this in mind our McGill HydroMET group has successfully used EPD recently to fabricate binder-free nanotitania/carbon anodes ( Journal of The Electrochemical Society , 162, D3013-D3018 (2015)). The performance of the EPD-deposited electrodes was further improved via sintering, this was then compared to standard PVDF-based electrodes and shown to have higher capacity retention characteristics. These encouraging results prompted research into carbon-coated lithium titanate spinel (Li 4 Ti 5 O 12 , LTO) electrodes. After screening different solvents (e.g. water, isopropanol, and several aqueous/organic hybrids) an acetonitrile and water (90/10 vol% respectively) medium was selected which made a stable suspension for both the carbon coated LTO and the conductive carbon. To improve adhesion, SBR binder was added. EPD conditions were 60V for three 15-second stages which yielded a deposit thickness of ~20 μm. In this paper an overview of this work will be presented by emphasizing the selection of EPD medium, characterization of the film, and battery performance (evaluated via galvanostatic charging/discharging cycling tests). In addition post-EPD film processing (compression or sintering) are to be discussed as a means to improve the mechanical integrity of the film.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».