A Material-Balance Equation for Stress-Sensitive Shale-Gas-Condensate Reservoirs
Notice bibliographique
Résumé
Summary During the last few years, production of liquid hydrocarbons has been reported from the gas-condensate window of the Eagle Ford, Barnett, Niobrara, and Marcellus shale plays in the US. This paper presents a new material-balance equation (MBE) for estimation of original gas in place (OGIP) and original condensate in place (OCIP) in shale-gas-condensate reservoirs. This material-balance methodology allows estimating the critical time for implementing gas injection in those cases in which condensate buildup represents a problem. In addition, the proposed MBE considers the effects of free, adsorbed, and dissolved gas-condensate production, and also takes into account the stress-dependency of porosity and permeability. An extension of the methodology is implemented for estimating the optimum time for hydraulically refracturing shale-condensate reservoirs. The new MBE applies to shale-gas-condensate reservoirs by incorporating a two-phase gas-deviation factor (Z2) and total cumulative gas production (Gpt) that includes both gas and condensate. If a crossplot of P/Z2 (pressure/Z2) vs. Gpt is prepared for a conventional gas-condensate reservoir, a single straight line is obtained. However, when the single-phase gas-compressibility factor (Z) is used, a deviation from the linear behavior is observed after the reservoir pressure falls below the gas dewpoint. This methodology is applied in this study to unconventional shale-gas condensate. Because there are three characteristic stages of production in a shale-gas reservoir (production of free, adsorbed, and dissolved gas), the location of the aforementioned deviation will provide a hint of the production stage that will be affected by condensate buildup. For example, if the deviation point is in the region where production of free gas is predominant, then the production caused by desorption mechanisms will be negatively affected because condensation will have already occurred in the reservoir, resulting in reduction of effective permeability to gas. This methodology then allows estimating the critical time for implementing gas injection on the basis of the total cumulative gas production. The method also permits estimating the optimum time for refracturing. The refracturing can be of a normal size for a given shale (similar to the original fracturing job), or it can be a superfrac job. Results are presented as crossplots of (1) P/Z2 vs. Gpt, (2) Gpt vs. time, and (3) gas rate vs. time. It is concluded that estimation of the critical time for implementing gas injection is useful for improving the performance of those shale-gas-condensate reservoirs in which condensate buildup represents a threat that can negatively affect the gas-production rate. The novelty of this work resides on the fact that the combined effect of free, adsorbed, and dissolved gas-production mechanisms on stress-sensitive shale-gas-condensate reservoirs had not been considered previously in the literature for estimation of OGIP, OCIP, and reservoir performance with an analytical MBE. The inclusion of gas injection and refracturing had not been considered either.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,001 | 0,001 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,001 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,001 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».