Microwave Synthesis and Sintering Methods for Reversible Solid Oxide Fuel Cell Fabrication
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
The primary focus of our work has been on the development of a stable mixed ionic and electronic conducting (MIEC) oxide electrode that is catalytic for application as an air electrode in reversible solid oxide fuel cells (RSOFCs). For this purpose, our recently developed La 0.3 Sr 0.7 Fe 0.7 Cr 0.3 O 3-δ (LSFCr) material [1], shown to be active as both an anode and cathode material in symmetrical SOFCs, has been modified by replacing the Sr in the A site with Ca, producing La 0.3 Ca 0.7 Fe 0.7 Cr 0.3 O 3- δ (LCFCr), which has been shown to be a very promising oxygen and fuel electrode for reversible SOFCs [2-4]. In the present work, we are working towards a solid oxide fuel cell/electrolysis cell that is fabricated entirely with the use of MW techniques, starting with the synthesis of the electrode/electrolyte powders and including the sintering of the full cell. We have already demonstrated that the LCFCr material can be produced from the precursor salts by microwave (MW) methods, showing that the pure phase can be obtained at a much lower synthesis temperature (300 o C) and that the synthesis time can be cut down by ca. 50% as compared to conventional solid-state processing methods [5]. Another outcome is that there is a significant increase in its surface area (10.4 m 2 g -1 ) vs. what is obtained using standard methods, i.e., 0.89 m 2 g -1 ) [5]. More recently, we have developed an effective method for the MW co-sintering of the anode-electrolyte-cathode combination in one simple step. This approach, in which sintering temperatures as high as 1000 o C can be achieved in just a few minutes, would have a significant impact on both lowering material and cell manufacturing costs and on further enhancing the performance of these cells. In this work, the LCFCr perovskite powders were first formed using MW methods and were then screen-printed on both sides of a gadolinia-doped ceria (GDC) electrolyte, followed by MW-assisted sintering of the cell. It is worth noting that there were no MW susceptors added in any of the fabrication steps and the normal pre-sintering steps used in conventional furnaces were also not needed. We show that these LCFCr/GDC/LCFCr cells, sintered using only MW methods, gave performances that were very similar to cells fabricated using normal ceramic processing methods. However, the time required to achieve this was decreased by ca. ten times, thus translating to significant savings in manufacturing costs. References [1] M. Chen, S. Paulson, V. Thangadurai, V. Birss, Sr-rich chromium ferrites as symmetrical solid oxide fuel cell electrodes, Journal of Power Sources, 236 (2013) 68-79. [2] P.K. Addo, B. Molero-Sanchez, A. Buyukaksoy, S. Paulson, V. Birss, Sulfur Tolerance of La0.3M0.7Fe0.7Cr0.3O3 -δ (M= Sr, Ca) Solid Oxide Fuel Cell Anodes, ECS Transactions, 66 (2015) 219-228. [3] B. Molero-Sánchez, P.K. Addo, A. Buyukaksoy, V. Birss, GDC-Infiltrated La0.3Ca0.7Fe0.7Cr0.3O3-δ Symmetrical Oxygen Electrodes for Reversible SOFCs, ECS Transactions, 66 (2015) 185-193. [4] B. Molero-Sánchez, J. Prado-Gonjal, D. Ávila-Brande, M. Chen, E. Morán, V. Birss, High performance La0.3Ca0.7Cr0.3Fe0.7O3−δ air electrode for reversible solid oxide fuel cell applications, International Journal of Hydrogen Energy, 40 (2015) 1902-1910. [5] B. Molero-Sánchez, J. Prado-Gonjal, D. Ávila-Brande, V. Birss, E. Morán, Microwave-assisted synthesis and characterization of new cathodic material for solid oxide fuel cells: La0.3Ca0.7Fe0.7Cr0.3O3−δ, Ceramics International, 41 (2015) 8411-8416.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,001 | 0,001 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle