High temperature strength and failure of the Ni-base Superalloy PM 3030
Notice bibliographique
Résumé
Abstract The strength, fatigue life and fracture behavior of the oxide dispersion strengthened (ODS) nickel-base superalloy PM 3030 are investigated. The high Al content in PM 3030 leads to the formation of coherent γ′ particles and, thus, to additional precipitation strengthening. A coarse and elongated grain structure (R34) and two isotropic batches with mean grain sizes of 1 μm (R90) and 17 μm (R901315) are considered. Compressive constant strain rate tests and high cycle fatigue (HCF) tests are performed. Optical, scanning and transmission electron microscopy (OM, SEM and TEM) are carried out. The properties are compared with those of the solely oxide dispersion strengthened Ni-base alloy PM 1000 [Estrin, Y., Heilmaier, M., Drew, G., 1999. Creep properties of an oxide dispersion strengthened nickel-base alloy: the effect of grain orientation and grain aspect ratio. Mater. Sci. Eng. A 272(1), 163–173]. It is found that additional γ′ hardening provides an increase in quasi-static strength by about a factor 2 and in HCF life by about a factor 10 2 –10 3 at temperatures up to 850 °C. When fatigue life is compared at a fixed ratio of stress amplitude-to-yield or ultimate compressive strength, R34 shows a fatigue life similar to that of PM 1000 at lower temperature (e.g. 600 °C) indicating that the quasi-static strength advantage is proportionally translated into improved fatigue performance; for higher temperatures (850 °C) however, R34 shows a shorter fatigue life as compared to PM 1000. Grain size reduction, as exemplified with the fine grain R90 batch, also provides an increase in strength up to the equicohesion temperature ( T E ) [Dieter, G.E., 1986. Mechanical Metallurgy. SI Metric ed. McGraw-Hill Book Company, London]. Above T E , faster diffusion and grain boundary sliding [Raj, R., Ashby, M.F., 1971. On the grain boundary sliding and diffusional creep. Metall. Trans. 2, 1113–1127; Spingarn, J.R., Nix, W.D., 1978. Diffusional creep and diffusionally accommodated grain rearrangement. Acta Metall. 26, 1389–1398] lead to a drastic drop in strength for the R90 material. In contrast, the batch with intermediate grain size (R901315) shows strength comparable to that of R34 up to 850 °C. Furthermore, R901315 shows improved crack tolerance compared to its coarse grain counterpart R34. Due to premature crack initiating coarse oxide particles however, R901315 does not show any improvement in elongation to failure during tensile tests. Eliminating those coarse particles is expected to improve the ductility and toughness of this isotropic batch.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».