Synthesis of Glycerol-Based Biopolyesters as Toughness Enhancers for Polylactic Acid Bioplastic through Reactive Extrusion
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
High Resolution Image Download MS PowerPoint Slide The synthesis of polyesters based on glycerol, succinic acid [poly(glycerol succinate), PGS] and/or maleic anhydride [poly(glycerol succinate- co -maleate), PGSMA] was investigated aiming to produce a green product suitable for toughening of polylactic acid (PLA) using melt blending technologies. The molar ratio of reactants and the synthesis temperature were screened to find optimum synthesis conditions leading to the highest toughness enhancement of PLA. It was found that a molar ratio of reactants of 1:1 glycerol/succinic acid increases the effectiveness of PGS as a toughening agent for PLA, which correlates with the achievement of a higher molecular weight on the synthesis of PGS. The introduction of maleic anhydride as a comonomer for the synthesis of the partial replacement of succinic acid was advantageous for making PGS suitable for reactive extrusion (REX) mediated by free radical initiators. The tensile toughness of the REX PLA/PGSMA blends was improved by 392% compared with that of neat PLA, which was caused by the simultaneous cross-linking of PGSMA within the PLA matrix, and the in situ formation of PLA- g -PGSMA graft copolymers acting as interfacial compatibilizers. Two-dimensional nuclear magnetic resonance and Fourier transform infrared analysis confirmed the formation of PLA- g -PGSMA species on REX experiments. This in turn caused a decrease in the diameter of the PGS particles dispersed within the PLA matrix from >10 μm to approximately 2 μm as observed using scanning electron microscopy. A further increase of 1600% in the toughness of the blends was achieved by lowering the synthesis temperature of PGSMA from 180 to 150 °C. The optimum synthesis conditions for PGSMA leading to the highest increase in the toughness of 80/20 PLA/PGSMA blends were found to be 1:0.5:0.5 mol glycerol/succinic acid/maleic anhydride synthesized at a temperature of 150 °C for 5 h.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,001 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,001 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle