Radio-Frequency Heating Combined With Solvent Injection for Heavy-Oil Recovery
Notice bibliographique
Résumé
This article, written by Special Publications Editor Adam Wilson, contains highlights of paper SPE 180709, “Heavy-Oil Recovery by a Combination of Radio-Frequency Heating With Solvent Injection,” by I. Bogdanov, SPE, S. Cambon, and M. Mujica, CHLOE, and A. Brisset, SPE, Total, prepared for the 2016 SPE Canada Heavy Oil Technical Conference, Calgary, 7–9 June. The paper has not been peer reviewed. The most popular technology for producing heavy oil (HO) and bitumen is reservoir heating, mainly by steam injection. Electromagnetic (EM) heating is a capable alternative. Radio-frequency heating (RFH) results from the microwave effect and has the advantage of avoiding problems associated with water supply and treatment. The advantages of RFH technology can be strengthened with solvent injection. After a period of preheating, solvent injection may lead to improved oil recovery because of additional decrease in oil viscosity. Introduction The complexity of HO recovery has inspired profound modifications in production technology. To find a successful technology, combinations of known mechanisms are considered frequently. Many of these modifications use solvent coinjection. No single commercial reservoir simulator is able to compute the interaction of an RF antenna with a reservoir. Despite this, field-scale RFH simulations have been performed with coupled simulators, which separately model reservoir dynamics and in-situ EM-field distribution. Although limited in computational performance, this approach can be used successfully for field-scale simulations. The principal object of the numerical study presented in this paper is the solvent/HO mixture under RFH conditions in an HO reservoir. The study has attempted to shed light on whether solvent-assisted RFH technology is capable of improving oil-recovery efficiency and to specify its advantages and draw backs in a typical Athabasca deposit. Simulation Model Large-scale RFH models have numerically simulated realistic oil recovery, providing a technical basis for critical analysis of oil-recovery processes. The numerical methodology based on loose coupling of reservoir and EM-field simulators has been developed recently. A coupling code has been built that simultaneously launches two simulators and initializes problem geometries and grids. The strong point of this approach is that the thermal multicomponent flow and the EM-field calculations can be presented on different grids adapted to their specific solutions. Main Results and Discussion Preheating. Preheating is necessary to enhance well connectivity and allow solvent injection. This period is common in thermal recovery for highly viscous oils. Two important advantages of RFH-based oil recovery during the preheating phase are that (1) well-injectivity problems do not exist for EM fields and that (2) the EM heating field is volumetric, spread over a certain distance in the reservoir, and, hence, may be more efficient than standard steam-circulation options. It should be noted, however, that other factors such as heating geometry related to well configuration can affect the efficiency of this process and should not be neglected.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».