Statistical analysis and theoretical predictions of the tensile-strength retention of glass fiber-reinforced polymer bars based on resin type
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
This paper presents experimental investigation, statistical analysis, and theoretical predictions of tensile-strength retention of glass fiber-reinforced polymer bars, made with vinyl-ester, polyester, or epoxy resins. The durability of glass fiber-reinforced polymer bars was evaluated as a function of time of immersion in alkaline solution. The aging of the three glass fiber-reinforced polymer bar types consisted of immersion glass fiber-reinforced polymer bar samples in an alkaline solution (up to 5000 h) at different elevated exposure temperatures. Subsequently, the physical and tensile properties of the unconditioned bars were compared with that of the conditioned bars to assess the durability performance of the glass fiber-reinforced polymer bars. Microstructure of all of the glass fiber-reinforced polymer bar types was investigated with scanning electron microscopy, energy dispersive spectroscopy, and Fourier transform infrared spectroscopy for both the conditioned and unconditioned cases, to qualitatively explain the experimental results and to assess changes and/or degradation in the glass fiber-reinforced polymer bars. In addition, the long-term performance of glass fiber-reinforced polymer bars was assessed considering the effect of service years, environmental humidity, and seasonal temperature fluctuations. The test results showed that the tensile strength of the glass fiber-reinforced polymer bars was affected by increased immersion time at higher temperatures and the reduction in tensile strength was statistically significantly dependent on the type of resin system. The prediction approach of the glass fiber-reinforced polymer bars based on the environmental reduction factor ( C E ) after 200 years indicated that the C E values for vinyl-ester, epoxy, and polyester glass fiber-reinforced polymer bars can be conservatively recommended to 0.81, 0.75, and 0.71, respectively, for a moisture-saturated environment (relative humidity = 100%) and at 30℃. The polyester glass fiber-reinforced polymer bars experienced greater debonding at the fiber–resin interface than the vinyl-ester and epoxy glass fiber-reinforced polymer bars.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,001 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle