Three-dimensional analysis of unanticipated behavior of a deep excavation
Notice bibliographique
Résumé
A three-dimensional (3D) effective stress finite element analysis, modified to account for hydrofracturing and gassy soil behavior, is used to examine the potential for the venting of water and gas from a bedrock aquifer and through 13–14 m of low permeability clayey silt between the base of the excavation and the bedrock following excavation to about 24 m in an approximately 40 m thick clayey silt deposit. The clayey deposit contained sand lenses with dissolved gas. The analysis predicts that the exsolution of this dissolved gas, caused by a reduction in total stress due to the excavation, results in liquefaction of the sand in the lenses and consequent lateral deformations of the side slopes. The analysis predicts hydrofracturing through the remaining clayey silt when the excavation reaches its final depth and this explains the venting of water and gas from the underlying aquifer that was observed above a local bedrock high. The presence of gassy sand lenses created weak zones within the clayey deposit that influenced the path of the hydrofracturing. However, the analyses suggest that, for the depth of excavation and bedrock elevation examined, hydrofracturing and subsequent venting would have occurred even if there had been no sand lenses.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,001 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,001 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,001 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».