Behaviour of Strip Footing in the Vicinity of Non-Yielding Wall
Notice bibliographique
Résumé
The paper presents two-1/3 scale nonyielding wall-strip footing models that were constructed and tested at the sand box test facility at the American University of Sharjah (AUS). The objective of the testing program is to quantify the responses of both strip footing and nonyielding wall constructed closer to each other. To achieve this objective, different design construction parameters have been considered including: (1) the strip footing width (B), (2) footing distance from non-yielding wall back (a), and, (3) strip footing embedment depth below the backfill surface (Df). Test results indicated that the location of the strip footing relative to the wall is a major factor in dictating the load bearing capacity of the strip footing, and the maximum lateral deflection of the non-yielding wall. Meanwhile, the vertically loaded strip footing imposed substantial vertical and horizontal forces at the wall top and bottom boundaries. The strip footing load bearing capacity increased as the distance from the wall increased, the footing width decreased, and the embedment depth increased. Data collected from the responses of scaled-physical model test were used to recognize deficiencies in current design approaches for similar soil structure interaction problems.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».