Robust Position Sensorless Model Predictive Control for Interior Permanent Magnet Synchronous Motor Drives
Notice bibliographique
Résumé
This thesis focuses on utilizing the persistent voltage vector injections by finite control set model predictive control (FCSMPC) to enable simultaneous estimations of both position and parameters in order to realize robust sensorless interior permanent magnet synchronous machine (IPMSM) drives valid at the entire operating region including no-load standstill without any additional signal injection and switchover. The system (here, IPMSM) needs to meet certain observability conditions to identify the parameters and position. Moreover, each combination of the parameters and/or position involves different observability requirements which cannot be accomplished at every operating point. In particular, meeting the observability for parameters and position at no-load standstill is more challenging. This is overcome by generating persistent excitation in the system with high-frequency signal injection. The FCSMPC scheme inherently features the persistent excitation with voltage vector injection and hence no additional signal injection is required. Moreover, the persistent excitation always exists for FCSMPC except at the standstill where the control applies the null vectors when the reference currents are zero. However, introducing a small negative d axis current at the standstill would be sufficient to overcome this situation.The parameter estimations are investigated at first in this thesis. The observability is analyzed for the combinations of two, three and four parameters and experimentally validated by online identification based on recursive least square (RLS) based adaptive observer. The worst case operating points concerning observability are identified and experimentally proved that the online identification of all the parameter combinations could be accomplished with persistent excitation by FCMPC. Moreover, the effect of estimation error in one parameter on the other known as parameter coupling is reduced with the proposed decoupling technique. The persistent voltage vector injections by FCSMPC help to meet the observability conditions for estimating the position, especially at low speeds. However, the arbitrary nature of the switching ripples and absence of PWM modulator void the possibility of applying the standard demodulation based techniques for FCSMPC. Consequently, a nonlinear optimization based observer is proposed to estimate both the position and speed, and experimentally validated from standstill to maximum speed. Furthermore, a compensator is also proposed that prevents converging to saddle and symmetrical ( ambiguity) solutions. The robustness analysis of the proposed nonlinear optimization based observer shows that estimating the position without co-estimating the speed is more robust and the main influencing parameters on the accuracy of the position estimation are d and q inductances. Subsequently, the proposed nonlinear optimization based observer is extended to simultaneously estimate the position, d and q inductances. The experimental results show the substantial improvements in response time, and reduction in both steady and transient state position errors. In summary, this thesis presents the significance of persistent voltage vector injections in estimating both parameter and position, and also shows that nonlinear optimization based technique is an ideal candidate for robust sensorless FCSMPC.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,001 | 0,001 |
| Méta-épidémiologie (sens large) | 0,001 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,001 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,005 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».