Mechanically Milled Si-Mn-Fe Alloys as Negative Electrodes for Li-Ion Batteries
Notice bibliographique
Résumé
The theoretical volumetric capacity of silicon (2194 Ah/L) is much larger than that of graphite (756 Ah/L). However, the large volume expansion of silicon is still a main concern for practical utilization. One method of reducing the volume expansion of Si is to alloy it with an inactive element. Both iron and manganese are cheap and abundant transition metals and are therefore interesting candidate inactive alloying metals for silicon based anodes. The binary systems, including Si-Fe and Si-Mn, have been previously studied in our group and by others. It has been found that adding Mn or Fe to Si reduces volume expansion during lithiation by forming inactive phases with Si and by inhibiting Li15Si4 formation. The silicides of Fe and Mn are different in structure and stoichiometry. Ball milled alloys in the Si-Fe-Mn ternary system have not been previously reported. Therefore it is meaningful to investigate the Si-Fe-Mn ternary system. Here, Si100-x-y Mn x Fe y ((x,y)=(0,15), (5,12), (10,9), (15,6), (20,3), (25,0)) alloys were prepared by ball milling and their phase composition, microstructure and electrochemistry in Li half cells were studied. The XRD results show that α-Si2Fe and β-Si2Fe are formed in low Mn content samples, i.e. Si85Fe15, Si83Mn5Fe12. As the Mn content is increased, only Si19Mn11 phase is detected. However, the continuous peak shifts in XRD profiles and Mossbauer spectroscopy, shown in Figure 1, demonstrate that Fe atoms are present in the Si19Mn11 structure, to form ternary solid solutions. The potential and differential capacity curves of Si100-x-y Mn x Fe y alloys are typical of alloys in which Si is the only active phase. The formation of Li15Si4 is successfully suppressed in all the samples in the initial cycles. However, Li15Si4 forms after about 10 cycles, as shown in Figure 2. The volumetric capacity and volume expansion of the materials increase with increasing silicon ratio, as shown in Figure 3. In this presentation the composition, microstructure and electrochemistry of alloys in the Si-Mn-Fe system will be thoroughly discussed. Figure 1
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,001 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».