Dynamic mechanical analysis of pure and fiber‐reinforced thermoset‐ and thermoplastic‐based polymers and free volume‐based viscoelastic modeling
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
Fiber‐reinforced polymer composites have gained significant importance in engineering applications and are widely used as structural components. The optimal choice of combinations of the type of polymer matrix and the fiber content depend on the required applications. In view of this, polypropylene (PP), a thermoplastic, reinforced with 30 wt.% of short glass fibers (PP‐GF30) is considered for this study. Additionally, a rather new composite system based on unsaturated polyester‐polyurethane hybrid resin (UPPH) is introduced. This thermoset‐based material is reinforced with 41 wt.% of long discontinuous glass fibers (UPPH‐GF41). Dynamic mechanical analysis (DMA) is performed on the pure polymer and the composite samples to experimentally characterize the temperature‐ and frequency‐dependent material behavior. It is observed that the stiffness of the materials is highly temperature‐dependent. PP exhibits a nonlinear viscoelastic behavior in the temperature range of possible applications whereas the UPPH material shows a less pronounced behavior. The resulting experimental data not only give general information on the material behavior of the composite subjected to a temperature and frequency load but also provide input as well as validation data for the developed material modeling methods. In an industrial environment, homogenized elastic material properties are desirable for analysis of the structural components at room temperature conditions. A mean field homogenization method is introduced to estimate the effective elastic material properties on a macroscopic scale. This method is formulated explicitly in terms of orientation tensors of second‐ and fourth‐order, describing quantitatively the microstructure of the corresponding composite. Additionally, the thermoviscoelastic material behavior for the considered temperature range is modeled by the free volume concept. In this context, the material parameters for the pure PP and UPPH material are identified. The calculated simulation results are compared with the experimental data entailing good agreements.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,001 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle