Flow Boiling Characteristics of R245fa in a Plate and Shell Heat Exchanger
Notice bibliographique
Résumé
Recently, environmental and energy regulations are being strengthened all over the world.In this environment, various studies have being conducted to utilize the high-temperature waste heat abandoned in industrial fields.Therefore, the selection of a heat exchanger suitable for high-temperature applications is essential.A plate and shell heat exchanger (PSHE) is a heat exchanger that combines the advantages of a shell and tube heat exchanger and a plate heat exchanger.It is suitable for use in such high-temperature conditions and has high thermal efficiency.Previous studies investigated the flow boiling heat transfer and pressure drop characteristics of various refrigerants [1,2].However, these studies have mainly been conducted under low-temperature conditions, and few studies have been conducted in PSHEs.Therefore, in this study, the flow boiling heat transfer and pressure drop characteristics of R245fa with high critical temperature were studied in PSHEs at relatively high-temperature conditions of 60-80℃.The channels in the heat exchanger were composed of counter flow.The upward flow of R245fa received heat from the downward flowing water.The heat transfer plates had a 50° chevron.In addition to the saturation temperature, the experiments were performed by varying mean vapor quality, mass flux, and heat flux.The water to water experiments were carried out before the flow boiling experiment.The water side correlation was developed using the modified Wilson plot method [3].As the saturation temperature increased, the heat transfer coefficient increased and frictional pressure drop decreased due to decreased specific volume of vapor.As the mean vapor quality increased, the heat transfer coefficient and frictional pressure drop increased due to increased velocity of vapor.However, the heat transfer coefficient decreased after a certain value due to dry-out.As the mass flux increased, the heat transfer coefficient and frictional pressure drop increased due to the increased velocity and turbulence.The effects of the heat flux on heat transfer coefficient and frictional pressure drop were not significant.The variations of the heat transfer and pressure drop with variables were more sensitive to vapor state than liquid state.The correlations on the heat transfer and pressure drop of R245fa in PSHE were developed in terms of equivalent Reynolds number and Prandtl number.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,004 | 0,001 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».