Enhanced Electrical and Electromagnetic Interference Shielding Properties of Polymer–Graphene Nanoplatelet Composites Fabricated via Supercritical-Fluid Treatment and Physical Foaming
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
Lightweight high-density polyethylene (HDPE)-graphene nanoplatelet (GnP) composite foams were fabricated via a supercritical-fluid (SCF) treatment and physical foaming in an injection-molding process. We demonstrated that the introduction of a microcellular structure can substantially increase the electrical conductivity and can decrease the percolation threshold of the polymer-GnP composites. The nanocomposite foams had a significantly higher electrical conductivity, a higher dielectric constant, a higher electromagnetic interference (EMI) shielding effectiveness (SE), and a lower percolation threshold compared to their regular injection-molded counterparts. The SCF treatment and foaming exfoliated the GnPs in situ during the fabrication process. This process also changed the GnP's flow-induced arrangement by reducing the melt viscosity and cellular growth. Moreover, the generation of a cellular structure rearranged the GnPs to be mainly perpendicular to the radial direction of the bubble growth. This enhanced the GnP's interconnectivity and produced a unique GnP arrangement around the cells. Therefore, the through-plane conductivity increased up to a maximum of 9 orders of magnitude and the percolation threshold decreased by up to 62%. The lightweight injection-molded nanocomposite foams of 9.8 vol % GnP exhibited a real permittivity of ε' = 106.4, which was superior to that of their regular injection-molded (ε' = 6.2). A maximum K-band EMI SE of 31.6 dB was achieved in HDPE-19 vol % GnP composite foams, which was 45% higher than that of the solid counterpart. In addition, the physical foaming reduced the density of the HDPE-GnP foams by up to 26%. Therefore, the fabricated polymer-GnP nanocomposite foams in this study pointed toward the further development of lightweight and conductive polymer-GnP composites with tailored properties.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,001 | 0,000 |
| Méta-épidémiologie (sens large) | 0,001 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,001 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle