Notice bibliographique
Résumé
EPDM polymers have been used in automotive weather seals for more than 30 years and there have been numerous investigations into their mixing and extrusion. However, the stability of EPDM polymers under the heat and shear forces that occur during the production of composites is generally ignored and inadequately understood. This paper describes an investigation into a variety of commercial grades of EPDM polymers exposed to heat ageing and shear. The behaviour of the polymers on their own and in composites was investigated. Weight loss and colour change were observed at 150°C in a hot air oven. Shear stability was investigated in a mixing chamber with an internal volume of 800 cm 3 . The mixer was equipped with tangential (Banbury) rotors. The chamber temperature was set at 66°C. The change in the molecular weight of the polymer, the molecular weight distribution and the degree of branching after exposure to shear stress for different periods of time were characterised using GPC and RPA. It was established that a polymer product with metallocene catalysts has the best thermal stability. However, a polymer with approximately the same molecular weight produced with conventional Ziegler-Natta catalysts had the best overall molecular and structural stability when exposed to heat ageing and shear. As far as the oil-extended polymers with high molecular weights were concerned, one of the polymers investigated was found to have much better molecular weight retention than the oil-extended polymer even though they are both produced with similar catalysts and production methods. It is not at present possible to reach a final conclusion regarding the interaction between the stability of a polymer when aged in hot air or in the mixer and the catalysts used in its production assuming that most polymers contain a similar stabiliser in a similar concentration.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».