AN APPROACH TO EXAMINE THE EFFECT OF TAPER ANGLE AND THREADING ON PERIPROSTHETIC BONE REMODELING FROM BONE-ANCHORED AMPUTATION PROSTHESES
Notice bibliographique
Résumé
INTRODUCTION The most common problems experienced by transfemoral amputees using socket prostheses are soft tissue pain and a limited range of motion around the hip joint [1]. Recently, intraosseous transcutaneous amputation prostheses (ITAP) have been developed as an alternative to the standard socket prostheses for amputees. A current shortcoming of ITAP is the change in the local mechanical loading at the bone-implant interface leading to bone resorption. The clinical consequences of this bone loss are increased risks of bone fracture and implant loosening [2]. The purpose of this study was to develop a finite element modeling approach to examine the effect of ITAP fixture threading and taper angle on femoral bone remodeling. METHODS An intact femoral geometry was generated using Mimics software (Materialise, Leuven, Belgium) from CT scans obtained from the VAHKUM database [3]. Twelve ITAP (six threaded and six unthreaded) implants of varying taper angles were designed using SolidWorks (Waltham, MA). Implants were registered and aligned within the femoral diaphysis, and the implant-femur assembly was meshed with quadratic tetrahedral elements; elements at the bone-implant interface shared identical nodes to represent full osseointegration. Bone elements were assigned inhomogeneous linear-elastic material properties based on CT Hounsfield units. Implant material was modeled as titanium alloy Ti6Al4V ( E =114 GPa, ν =0.3), which is commonly used for prostheses due to its superior strength and biocompatibility. Boundary conditions and loads applied to the finite element models were taken from Tomaszewski et al. [4], which were linearly scaled to correspond to an individual with a mass of 70.1 kg and a height of 170 cm. All models were solved using ABAQUS Standard v6.1 (Providence, RI). Strain energy density was calculated for each implanted femur and compared to those of an intact femur. RESULTS Considerable energy was transferred to the ITAP (Figure 1). Consequently, the periprosthetic cortical bone in the implanted femur had a significantly lower strain energy density than that of the intact femur (Figure 1). DISCUSSION AND CONCLUSIONS It is critical that implant geometry is optimized to decrease periprosthetic bone resorption and reduce the incidence of bone fracture and implant loosening. Changes in strain energy density following prosthetic implantation is a driving stimulus for bone remodeling, and our future work will incorporate adaptive bone remodeling algorithms into our simulations.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,001 | 0,001 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,001 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,001 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».