Effects of Bamboo Fiber Length and Loading on Mechanical, Thermal and Pulverization Properties of Phenolic Foam Composites
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
In order to improve the mechanical properties and toughness of phenolic foams, a reinforcement method using two kinds of bamboo fibers was optimized with respect to the fiber contents. The compressive and flexural properties, thermal stability, friability and morphology of the phenolic foam composites were studied. The mechanical properties of the pristine foam and composites were evaluated by measuring the compressive strength. The results showed that the greatest mechanical properties were achieved by incorporating 2.5wt% of the reinforcement, and the compressive and flexural strengths of the two composites increased by 26.21% and 24.35%, respectively, compared with that of the pristine foam. The results of thermogravimetric testing demonstrated that the addition of bamboo fiber imparted better thermal stability to the phenolic foam, which was mainly attributed to the higher initial thermal decomposition temperature of the bamboo fiber. However, the influences of both reinforcements on the thermal stability of the material were negligible. The incorporation of bamboo fiber decreased the friability of the phenolic foam. Furthermore, the reduction in friability of the foam composites with longer lengths were higher than that in foams with shorter bamboo fibers. Moreover, the morphology and cell sizes of the fiber-reinforced phenolic foams were analyzed by scanning electron microscopy, the results indicated strong bonding between the fibers and phenolic matrix, and the incorporation of the bamboo fibers into the foam resulted in increased cell size of the material. Finally, the thermal conductivity and flame resistance of the phenolic foams reinforced by the bamboo fibers were also measured.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle