Evaluation of Polymer-Assisted Carbonated Water Injection in Sandstone Reservoir: Absorption Kinetics, Rheology, and Oil Recovery Results
Notice bibliographique
Résumé
The efficacy of carbonated water injection (CWI) is associated with weak CO2 absorption in water, and the resulting CWI does not meet the requirements of controlled CO2 mobility and enhanced oil recovery (EOR). High molecular weight oilfield polymer, e.g., polyacrylamide (PAM), is water-soluble and often used in water shut-off and mobility control applications. Thus, in this study, PAM, with concentrations (0.5, 1, and 2 g/L), as a viscosifier is used to improve the CO2 absorption capacity of water for possible implementation in CWI applications. PAM with intermediate concentration (1 g/L) was favorable for enhanced CO2 absorption with a retention period of 4 days in water. With high PAM concentration (2.0 g/L), CO2 absorption reduced and gas in the form of globules moderately absorbed in the upper layers of P-1 solution, resulting in a significant amount of aqueous phase left unabsorbed by CO2. At high PAM concentration, enough number of PAM chains were available to interact with CO2 and, as a result, solution received premature gelling that resisted further entry of CO2. The effect of stirring on CO2 absorption showed that the rate of stirring increases the amount of CO2 absorbed in P-1 solution. These observations were supported by rheological data which showed that CO2 absorption reduced the viscosity of the P-1 solution, and the decrease in viscosity is directly proportional to the amount of CO2 absorbed. Finally, oil recovery experiments were performed using P-1 solution with and without CO2 and compared with water. The oil recovery was found to be higher for P-1 solution prepared with 600 rpm. Thus, this study highlights the application of relatively common oilfield polymer PAM (⩽ 1 g/L) for enhanced CO2 absorption and improved oil recovery than conventional CWI, which recommends use of polymer-enhanced carbonated water injection (PE-CWI) in oil and gas industry.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,001 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».