INFLUENCE OF MACRO- AND MICROSTRUCTURE OF STEEL GRINDING BALLS ON THEIR IMPACT RESISTANCE
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
Based on the analysis of the literature and production data, it is shown that the wear resistance of steel grinding balls, which are the main grinding medium for crushing various types of raw materials in the drum type mills, is determined not only by hardness of the surface layer, but also by the quality of their macro- and microstructure. At the same time, there is a complex nature of dependences of the balls impact resistance on the above mentioned parameters with their simultaneous impact, which determines the relevance of research in this direction. Series of experimental studies was carried out in order to obtain scientifically based dependencies of impact resistance of grinding balls on the quality of their macro- and microstructure. The grinding balls with a diameter of40 mm,50 mmand60 mmproduced by OJSC “EVRAZ ZSMK” (Novokuznetsk) and by JSC “Industrial Solutions” (Nizhny Tagil) were used. The research was carried out by metallographic, durometric and fractographic methods of analysis; tests of grinding balls on the impact resistance were performed on the impact drop machine. According to the results of metallographic studies it was determined that the volume-hardened balls are characterized by a three zone structure. The surface hardened layer with a depth from 1.9 to7.4 mmis martensite. The transition zone with thickness from 1.0 to1.7 mmhas a structure martensite + troostite. The central zone occupies the entire remaining volume of the ball and has several varieties of microstructure: ferrite + perlite, martensite + troostite + ferrite, martensite + troostite. On the basis of generalization of the obtained experimental data, it was established that at surface hardness of balls within 42 – 52 HRC the quality of macrostructure (presence of flakes) is the parameter determining impact resistance. For balls with high surface hardness (57 – 61 HRC) the most significant impact on impact resistance is provided by non-uniform microstructure of metal, which causes a significant difference in hardness across the balls crosssection.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle