Synthesis and Characterization of Metal-Organic Frameworks Films and their Application as Chemical Sensors
Notice bibliographique
Résumé
Metal-organic frameworks (MOFs) are porous crystalline materials composed of metal ions and organic ligands. Recent research displays a growing interest in utilizing MOFs for the potential application of detecting trace gases. This is performed by designing a homogenous thin film of MOFs on a solid substrate attachment. Fabrication of MOFs into thin films present drawbacks, which include long processing times, poor homogeneity, and weak attachment to substrates. In this work, two new synthesis approaches have been developed to overcome the limitations mentioned. These methods of preparation were developed for Cu-BTC, Cu-BDC, ZIF-8 and MOF-5 films on a metal substrate. The metal substrates were chosen to act as a metal ion source by creating a metal hydroxide layer via oxidation, which facilitates the dissolution of metals ions to coordinate with the organic ligands. Intense pulsed light (IPL) and ultrasonic irradiations were used to overcome the activation energy required to initiate the chemical reaction. Both IPL and sonication methods showed good homogeneity, attachment and crystallinity. The IPL film crystal sizes are relatively smaller than the sonicated crystals, this can be contributed to the shorten reaction time of the IPL method (3 min). This study introduces a novel approach to processing MOF films for sensors applied to gas detection. Interestingly, a high-performance hydrogen sensor has been demonstrated by synthesizing a Cu-BTC/polyaniline (PANI) nanocomposite film on a quartz crystal microbalance (QCM) using the IPL method. The selectivity and sensitivity of hydrogen gas on the Cu-BTC film and Cu-BTC/PANI film were compared at room temperature. The Cu-BTC/PANI film showed significantly enhanced results compared to the Cu-BTC film. In addition, a 2 - 5 second response time was achieved while operating at room temperature, showing indifference to high relative humidity (ca. 60%). TiO2-SnO2/MWCNT doped with Cu-BTC was also fabricated using IPL technique for trace ammonia detection. The IPL contributed to the rapid processing time and the thermal conversion of anatase TiO2 to rutile TiO2. The functional film showed a limit of detection of 3.3 ppm. The sensor exhibits reversibility during cyclic testing and minimal drift suggesting that the reaction mechanism is primarily surface adsorption.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,001 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,001 | 0,001 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,001 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».