Fracture Toughness, Flexural Strength, and Flexural Modulus of New CAD/CAM Resin Composite Blocks
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
PURPOSE: To determine and compare the fracture toughness, flexural strength and flexural modulus of four new, commercially available CAD/CAM resin composite blocks and one new CAD/CAM lithium disilicate glass-ceramic block, tested under dry and aged conditions. MATERIALS AND METHODS: Three dispersed-fillers resin composite blocks, CERASMART, KZR-CAD-HR2, and CAMouflage NOW, one polymer-infiltrated ceramic network resin composite block, Enamic, along with Obsidian, a lithium disilicate glass-ceramic block, were characterized. Fracture toughness was determined through the notchless triangular prism specimen test, while flexural strength and flexural modulus were determined by three-point bend testing. Blocks were cut and ground to obtain (6 × 6 × 6 × 12) mm prisms and 10:1 span-to-thickness ratio bars (n = 25/group); half of the resin composite specimens were aged in 37°C distilled water for 30 days before testing. Fractured surfaces were characterized using a scanning electron microscope. Results were analyzed using Weibull statistics and two-way ANOVA, followed by Scheffé multiple means comparisons (α = 0.05). RESULTS: . With regards to flexural strength, Obsidian > CERASMART = KZR > CAMouflage > Enamic. The flexural strength of the resin composites was lowered by ageing. Enamic was found to have the highest flexural modulus among the resin composites (33.02 GPa), but its value was significantly lower than that of Obsidian (76.46 GPa); flexural modulus was not affected by ageing. CONCLUSION: There was a significant difference in flexural strength between the materials, but not unanimously in flexural modulus and fracture toughness. The tested resin composite block materials had inferior flexural strength, flexural modulus and fracture toughness compared with the tested lithium disilicate glass-ceramic block (Obsidian). Enamic, the polymer infiltrated ceramic network material, had a significantly higher flexural modulus than the dispersed-fillers materials. Ageing had a deleterious impact on the flexural strength of all RCB, while its effect on the flexural modulus was insignificant. The selection of any restorative material requires a thorough analysis of its advantages and limitations to inform the clinical decision in a case-by-case approach.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle