Evaluation of coupled hydro-mechanical (H-M) behaviour of in situ shaft sealing components for used nuclear fuel
Notice bibliographique
Résumé
A full-scale shaft seal that is a composite concrete-clay-concrete seal was installed at Canada’s Underground Research Laboratory (URL). This installation spans a major water-bearing fracture zone located at a depth of 275 m and is intended to isolate two hydrogeochemcial regimes. Coupled Hydro-Mechanical (H-M) constitutive models were developed to examine performance of the H-M behaviour of the shaft seal. H-M parameters of the shaft seal components were determined using laboratory test data. The numerical results were compared with field readings regarding water uptake and development of total pressure in the system. Numerical prediction shows that the hydration process of the clay seal is dominantly affected by the groundwater flow from FZ2. Overall, numerical prediction shows reasonably good agreement with field readings; however, it underestimates evolution of total stresses. The possible reason could be that radial groundwater flow toward the system was not considered in the simplified 2-D modelling. Prediction of swelling pressure of the unsaturated clay seal is discussed. The first model using crystalline and osmotic swelling mechanisms estimates a swelling pressure of 0.86 MPa, which is close to what is expected (0.8 MPa) in the field. Another model applying confined conditions estimates a swelling pressure of 0.41 MPa. This difference in swelling pressure prediction could be attributed to different microstructures developed under different confining conditions. The model predictions were then verified in terms of the water retention capacity of the clay seal and show reasonably good agreement with the measured data. Sensitivity analyses were conducted to assess effects of variations of H-M parameters on evolution of H-M behaviour of the clay seal. Several sets of hydraulic and Barcelona Basic Model (BBM) mechanical parameters of the clay seal were determined using available laboratory test data. The numerical results indicate that the behaviour of the clay seal is more sensitive to hydraulic parameters than BBM mechanical parameters. Different sets of H-M parameters were obtained from the same clay material. For this reason, sensitivity analysis of the parameters and validation of the predictions are required to improve the possibility to match field and modelled behaviour.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,001 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».