Thermo-Mechanical Processing of Dual-Phase Steels and Its Effects on the Work Hardening Behaviour
Notice bibliographique
Résumé
This thesis focuses on understanding the relationship between the microstructure and the different work hardening mechanisms of DP steels.Through the application of various thermo-mechanical processing schedules prior to inter-critical (IC) annealing, five distinctly different microstructural variants were produced.The work hardening behaviour of the five microstructural variants was examined in terms of the true work hardening rate, , the instantaneous work hardening exponent, n, and the dislocation annihilation factor, h.Additionally, back stresses were measured in selected microstructural variants having similar martensite volume fraction of 15%, using a custom-made in-plane forward-reverse shear testing fixture.At small strains (<2%), the work hardening behaviour was found to be dominated by the introduction of back stresses and the generation of GNDs in the ferrite matrix.The work hardening response at this stage was characterized by p=0.5% and a minimum value in the instantaneous work hardening exponent, n min .Both of these parameters were determined to be functions of f /d (f is the volume fraction and d is the size of martensite particles), the mean ferrite grain size as well as the morphology and spatial distribution of martensite particles.At higher strains (2-3%), a maximum value in the instantaneous work hardening exponent is reached (n max ).This parameter, which can be considered as the work hardening capacity of the material, was found to be a function of mean ferrite grain size but is independent of f /d.The relative contribution of back stresses was also found to reach a constant value at a similar von Mises equivalent strain.This observation suggests that at strains above those associated with n max , other work ii hardening mechanisms become more important.At strains over 4%, dislocation annihilation by dynamic recovery becomes the controlling factor for the rate of work hardening.This phenomenon is described by the dislocation annihilation factor, h, and is a function of f /d, the mean ferrite grain size as well as the morphology and spatial distribution of martensite particles.Finally, it was concluded that the ideal DP microstructure will contain a uniform distribution of fine, equiaxed martensite particles in a fine, equiaxed ferrite matrix.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».