Transient Potential Induced Dissolution of Metal Biporlar Plates Used in Proton Exchange Membrane Fuel Cell
Notice bibliographique
Résumé
Corrosion of metallic bipolar plates (BPPs) under the aggressive working conditions is the major issue that impedes its application in proton exchange membrane fuel cells (PEMFCs). Transient potential is generated during the different operating conditions of PEMFCs such as start-up/shut-down(SU/SD), and dynamic loading stages. Transient potential-induced corrosion is a serious problem encountered by BPPs. To investigate the influence of transient potentials on corrosion of BPPs, potential pulses with different amplitudes are applied to specimens. Also, a novel zirconium oxynitride coating is prepared via atomic layer deposition to improve the stability of BPPs. Results show that transient potentials generated at passive and transpassive potential regions are both detrimental to the stability of BPPs. For the uncoated samples, a larger potential fluctuation in the passive region could induce a much higher frequency of passive film breakdown than that generated by a smaller potential fluctuation during the cyclic pulse tests. In the transpassive region, upon increasing transient potentials, the passive film formed on surface enters the potential dependent dissolution region, leading to severe intergranular corrosion after a certain cycles of pulse tests. The zirconium oxynitride coated samples present improved performance in both normal potentiostatic polarization and transient potential conditions. The enhanced corrosion resistance of coated samples is attributed to the continuous formation of protective oxide layer which has a wider band gap than passive films formed on uncoated samples. Therefore, the coated sample enters the transpassive potential region at a more positive potential and thus exhibits much lower dissolution rate. Moreover, the Mott-Schottky plots suggests that the defect density of the coated samples is much lower than the uncoated counterpart, and the deterioration of uncoated sample performance under different transient potentials is related to the passive film disorder degree. From our study, transient potentials would accelerate the degradation of BPPs, and the development of bipolar plates coated with dense protective surface films could help mitigate the dissolution induced by the transient potentials, thus improving stability and durability of BPPs. Specially, a layer of coating with a wider band gap between Fermi level and valance band is beneficial to reduce the dissolution in the transpassive potential region.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,001 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».