Solidification Structures in Low-Alloyed Powder Metallurgy Steels Obtained through Permanent Liquid Phase Sintering Using a Master Alloy Containing Boron
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
Abstract Powder metallurgy (PM) steels containing boron form an attractive group of alloys because of the important densification that can be achieved through permanent liquid phase sintering (LPS). However, upon solidification, such liquid phase is known to form borides or borocarbides. Recent works have shown that some alloying elements have significant interactions with the LPS of PM steels containing boron. More specifically, it is suspected that the concentration of prealloyed molybdenum influences the formation of boride/borocarbide upon cooling at the end of the sintering cycle. Therefore, the main objective of this work is to describe the relationship that exists between the concentration of prealloyed molybdenum and the crystal structure of the boride/borocarbide eutectic component that typically forms in PM steels containing boron. A master alloy made of iron-manganese-nickel-boron-carbon was utilized to introduce boron, thus providing enhanced sintering through LPS. Characterization in optical and scanning electron microscopy combined with electron-backscattered diffraction and energy-dispersive X-ray spectrometry (EDS) revealed that increasing the prealloyed molybdenum content not only increased the volume fraction of liquid phase but also modified the morphology and the nature of the boron-rich eutectic. Changing the prealloyed molybdenum content from 0.5 to 0.85 wt.% transformed the discontinuous M2B boride to a continuous M23(C,B)6 borocarbide phase, causing a drastic decrease in strength despite the higher densification observed at 0.85 wt.% molybdenum. The effect of molybdenum on the LPS process of boron PM steels is undeniable and was found to occur after the initial formation of the liquid phase. Indeed, differential scanning calorimetry revealed no difference in the endothermic melting peaks temperature for both concentration of molybdenum.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,001 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle