Influence of Elastic-Plastic Bending on the Relationship Between Applied Load and Maximum Bending Stress for Straight and Curved Bars
Notice bibliographique
Résumé
Abstract Bending capacity in excess of the load required to cause yielding is due to a combination of work hardening and the effect of the plastic zone spreading toward the neutral axis. For materials of sufficiently high ductility, a fully developed plastic zone is achieved and the bulk of the section is stressed beyond yield. For lower ductility materials, failure may occur prior to full development of the plastic zone such that only a fraction of the cross section is at or above the yield stress. In such cases, the relationship between applied load and maximum bending stress becomes sensitive to the shape of the stress-strain curve near the yield point. This relationship is examined for straight and curved bars of rectangular and trapezoidal cross-section for tensile stress-strain curves characterized by nonlinear functions. The stress distribution as a function of applied load is determined analytically by enforcing moment equilibrium across the section. The strain distribution is determined through the classical condition of “planes remain plane” during deformation. The solutions provide analytically smooth load curves such that maximum stress can be directly plotted as a function of applied load. These plots exhibit three distinct regimes of response: 1) elastic, 2) development of plastic zone, and 3) fully developed plastic zone. Since the response is analytically smooth, the detailed relationship through the knee of the tensile curve can be examined. The results indicate that bending capacity is influenced significantly by the development of small amounts of plastic strain prior to reaching a yield point defined by the usual 0.2% plastic strain offset method. The results also show how loss of ductility with respect to tensile elongation translates into reduced bending load capacity in a non-linear relationship.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,001 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».