INFLUENCE OF THE ANNEALING ON THE WEAR RESISTANCE OF GAS-THERMAL COATINGS FROM Ni-Cr-Al PSEUDOALLOY
Notice bibliographique
Résumé
The structural-phase state and tribotechnical properties of gas-thermal coatings made of Ni-Cr-Al pseudoalloy are investigated in the initial state and after annealing in the temperature range of 550-650 °С with holding time of 20–60 min. It is shown that in coatings sprayed by the method of high-speed metallization of wires made of Х20Н80 (Kh20N80) and aluminum АД-1 (AD-1), the phase composition includes γ-(Ni, Cr, Fe), Al and Al2O3. It is found that high-temperature annealing of Ni-Cr-Al coatings leads to the precipitation of intermetallic compounds Al3Ni, Ni2Al3, Ni3Al, and NiAl in them, as well as to an increase in the porosity of the coatings up to ≈15–20 vol.%, which is associated with the implementation of the Frenkel and Kirkendall effects. Tribotechnical tests of coatings are carried out according to the scheme of the reciprocating movement of the sample along the plate counterbody in the dry friction mode at a load of 1.5 MPa. It is shown that as a result of the annealing of the coatings, an increase in their wear resistance under dry friction conditions is registered up to 24 times in comparison with the initial state. In particular, the intensity of mass wear of the Ni-Cr-Al coating in the initial state is 28.7 × 10–3 mg/m, and those subjected to annealing at 600 °C for 60 min — 1.2 × 10–3 mg/m. Based on the carried out multifactorial experiment, it is found that the maximum wear resistance of Ni-Cr-Al-pseudo-alloy coatings under dry friction conditions is achieved as a result of their annealing at temperatures of 630–640 °С and a holding time of 40–50 min, which is associated with the release of large number of dispersed intermetallic phases Ni3Al and NiAl with a relatively insignificant increase in the porosity of the coatings.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,001 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,001 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».