Study of Belleville springs and bond graph analysis of passive vibration assisted rotary drilling tool.
Notice bibliographique
Résumé
Since 2008, the effect of active/passive sources of drilling vibration has been a topic of research at the Drilling Technology Laboratory of Memorial University of Newfoundland. Drill-off tests have been conducted in many different settings using fully instrumented lab-scale drill rigs (Small Drilling Simulator (SDS) and Large Drilling Simulator (LDS)) and through field trials in order to validate these effects and the researchers have been able to acquire substantially prominent results, which is evident from improved drilling rates and increased dynamic downhole weight on bit (DDWOB). One of the outcomes from those experiments is the development of novel passive Vibration assisted Rotary Drilling (p-VARD) Tool, which harnesses the vibration generated at bit-rock interface to improve the drilling rate and the measured DDWOB. The p-VARD tool uses different configuration of Belleville springs and elastomer to produce desired value of tool compliance and modify the damping. The research outcomes in this thesis explain the dynamic behaviour of the p-VARD tool and helps us understand the actual phenomenon inside the tool, which results in this behaviour. Mass-spring-damper schematics of the rigid and compliant drilling systems are analyzed with the help of bond graphs in 20-sim. Results show that the p-VARD can lower the drill string natural frequency significantly enabling it to resonate at the frequencies of the top drive. In order to facilitate the p-VARD experiments in a more controlled environment, the tool has been designed for the LDS, which is more advanced than the SDS. The dynamic simulation of the Belleville springs is in itself, a separate area of research that is used for the dynamic analysis of the p-VARD tool design. The LDS offers a wide range of rotary speeds and weight on bit and can be operated fully automatically or manually. P-VARD experiments in LDS will enable us to characterize the tool properties in more depth. The LDS p-VARD tool is designed with a minimum safety factor of 3.4 against the maximum torque generated by the LDS. It utilizes a uniformly grooved sensor plates with five identical and one distinct cross-section, which is attached to the outer shell to track the axial movement of the tool. The tool is designed such that the torque is transmitted from the inner shaft to the outer shell through four uniformly spaced keys and for fluid transmission, a 13 mm through hole is made through the middle of the tool.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,001 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,001 | 0,001 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,001 |
| Science ouverte | 0,001 | 0,000 |
| Intégrité de la recherche | 0,001 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,005 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».