16th International Workshop on Advanced Infrared Technology and Applications (AITA 2021)

first_page settings Order Article Reprints Font Type: Arial Georgia Verdana Font Size: Aa Aa Aa Line Spacing:    Column Width:    Background: Open AccessEditorial 16th International Workshop on Advanced Infrared Technology and Applications (AITA 2021) † by Paolo Bison 1, Gianluca Cadelano 2, Mario D'Acunto 3, Giovanni Ferrarini 1,*, Xavier Maldague 4, Davide Moroni 5, Valentina Raimondi 6, Antoni Rogalski 7, Takahide Sakagami 8, Marija Strojnik 9 and Monica Volinia 10 1 Consiglio Nazionale delle Ricerche, Istituto per le Tecnologie della Costruzione, 35127 Padova, Italy 2 Consiglio Nazionale delle Ricerche, Istituto per le Scienze dell'Atmosfera e del Clima, 35127 Padova, Italy 3 Consiglio Nazionale delle Ricerche, Istituto di Biofisica, 56124 Pisa, Italy 4 Computer Vision and Systems Laboratory, Department of Electrical and Computer Engineering, Laval University, Quebec City, QC G1V 0A6, Canada 5 CNR-ISTI, Consiglio Nazionale delle Ricerche, Istituto di Scienza e Tecnologie dell'Informazione "A. Faedo", 56124 Pisa, Italy 6 Consiglio Nazionale delle Ricerche, Istituto di Fisica Applicata "N. Carrara", 50019 Sesto Fiorentino, Italy 7 Institute of Applied Physics, Military University of Technology, 01-476 Warsaw, Poland 8 Department of Mechanical Engineering, Kobe University, Kobe 657-850, Japan 9 Optical Research Center, A. P. 1-948, Leon C.P. 37000, Guanajuato, Mexico 10 Department of Architecture and Design, Politecnico di Torino, 10129 Torino, Italy * Author to whom correspondence should be addressed. † Presented at the 16th International Workshop on Advanced Infrared Technology & Applications, 26–28 October 2021; Available online: https://aita2021.sciforum.net/. Eng. Proc. 2021, 8(1), 34; https://doi.org/10.3390/engproc2021008034 Published: 6 January 2022 (This article belongs to the Proceedings of The 16th International Workshop on Advanced Infrared Technology & Applications) Download Download PDF Download XML Download Epub Versions Notes Abstract: The 16th International Workshop on Advanced Infrared Technology and Applications (AITA 2021) was held online on 26–28 October 2021. Keywords: non-destructive testing and evaluation; remote sensing; environmental monitoring; materials; bio-medical applications; image processing 1. IntroductionSince 1992, AITA is an international conference aimed to assess the state of the art of technology in the infrared bands and to present its most interesting applications. The last AITA was held in Florence in 2019, where the idea of this conference series was launched 25 years ago, thanks to the efforts and commitment by the Fondazione "Giorgio Ronchi" led by Prof. Laura Ronchi Abbozzo.The 2021 edition was planned to be organized in Venice, but due to the pandemic situation, it was impossible to hold an in-person meeting. To keep the flame alive in spite of the persisting situation, the 16th International Workshop on Advanced Infrared Technology and Applications (AITA 2021) has been organized as an online event by: -Istituto per le Tecnologie della Costruzione (CNR-ITC);-Istituto di Fisica Applicata "Nello Carrara" (CNR-IFAC);-Istituto di Scienza e Tecnologie dell'Informazione "Alessandro Faedo" (CNR-ISTI);-Istituto di Biofisica (CNR-IBF);-Istituto di Scienze dell'Atmosfera e del Clima (CNR-ISAC);-Politecnico di Torino;-Fondazione "Giorgio Ronchi".Moreover, two institutions have offered their patronage to the event: The Italian Association of Infrared Thermography, Diagnostics and Condition Monitoring (AITI—DMC) and the Italian Society for Nondestructive Testing and Monitoring Diagnostics (AIPnD). 2. Conference DaysThe event was held online from 26 to 28 October 2021. The technical program was organized in six sessions covering the following topics: the Under 35 Best paper award, Non-destructive testing, Remote sensing and environmental monitoring, Materials, Bio-Medicals and Image processing.Each day, the Conference was divided in a pre-recorded session and a live session. The daily pre-recorded session presentations were streamed thrice to accommodate the different time zones. The live panel discussion was placed at the end of the streaming session and included keynotes, question and answer (Q&A) and sponsor presentations. In spite of the limited available time, the authors had the possibility to provide interesting additional information to the works they had submitted to the conference.A plenary lecture was delivered by Prof. Jean-Christophe Batsale from ENSAM in Bordeaux, France. His contribution, entitled "Multispectral and multiscale infrared imaging for the study of heat and mass transfer in heterogeneous media", described interesting applications that, starting from the physical modeling of the Thermal Non-Destructive Evaluation of delaminations in composite materials, extends to the evaluation of anisotropic thermal diffusion. Novel and worthwile results have been shown in the assessment of thermophysical properties of heterogeneous materials and in mapping the flow distribution from NIR to THz.Almost 40 papers were submitted to the conference and are published in a Special Issue of MDPI's Engineering Proceedings [1]. 3. Fifth under 35 Best Paper AwardFor the fifth time in the AITA Conference, the AITA Committee assigned a best paper award to presenting authors under 35 years old. The award is named after Ermanno Grinzato, AITA co-chairman for a long time and known scientist in the thermography community. The award supports young scientists that are involved in scientific research on the conference topics.The nine candidates submitted works of high interest for the AITA community and, due to the quality of their contributions, the award committee decided to assign the prize to three authors, equally placed:-Jue Hu (3D non-destructive inspection using novel infrared-terahertz fusion approaches) [2];-Ryohei Fujita (Micro-scale Fatigue Damage Assessment of CFRP Laminates Using Lock-in Thermography) [3];-Giuseppe Dell'Avvocato (Evaluation of effectiveness of heat treatments in boron steel by laser thermography) [4]. 4. CommitteesGeneral chairL. Ronchi AbbozzoFondazione Giorgio Ronchi, Firenze, ItalyCo-ChairP. BisonCNR-ITC, Padova, ItalyM. D'Acunto CNR-IBF, Pisa, ItalyX. Maldague Laval University, Quebec City, QB, CanadaD. Moroni CNR-ISTI, Pisa, ItalyV. Raimondi CNR-IFAC, Firenze, ItalyA. Rogalski Military University of Technology, Warsaw, PolandT. Sakagami Kobe University, Kobe, JapanM. Strojnik CIO, León, Guanajuato, MexicoScientific CommitteeD. Balageas ONERA, Chatillon, FranceE. Dereniak University of Arizona, Tucson, AZ, USAC.T. Elliott Heriot-Watt University, Edinburgh, ScotlandC. Maierhofer BAM, GermanyC. Meola University of Napoli, Napoli, ItalyH.N. Rutt Southampton University, Southampton, United KingdomG. Steenackers University of Antwerp, Antwerp, BelgiumV.P. Vavilov Tomsk University, Tomsk, RussiaM. Volinia Politecnico of Torino, Torino, ItalyOrganizing CommitteeP. BisonCNR-ITC, Padova, ItalyG. CadelanoCNR-ISAC, Padova, ItalyM. D'AcuntoCNR-IBF, Pisa, ItalyG. FerrariniCNR-ITC, Padova, ItalyD. Moroni CNR-ISTI, Pisa, ItalyV. Raimondi CNR-IFAC, Firenze, ItalyM. Volinia Politecnico di Torino, Torino, ItalyTechnical SupportS. RossiCNR-ITC, Padova, ItalyM. TampucciCNR-ISTI, Firenze, Italy FundingThis research received no external funding.AcknowledgmentsWe would like to thank the companies Teledyne FLIR, Telops and Horiba for supporting this event.Conflicts of InterestThe authors declare no conflict of interest.ReferencesAITA Conference Proceedings. Available online: https://www.mdpi.com/2673-4591/8/1 (accessed on 30 December 2021).Hu, J.; Zhang, H.; Sfarra, S.; Santulli, C.; Maldague, X. Three-Dimensional Non-Destructive Inspection Using Novel Infrared-Terahertz Fusion Approaches. Eng. Proc. 2021, 8, 24. [Google Scholar] [CrossRef]Fujita, R.; Katsukura, K.; Nagano, H. Micro-Scale Fatigue Damage Assessment of CFRP Laminates Using Lock-in Thermography. Eng. Proc. 2021, 8, 2. [Google Scholar] [CrossRef]Dell'Avvocato, G.; Palumbo, D.; Palmieri, M.E.; Galietti, U. Evaluation of Effectiveness of Heat Treatments in Boron Steel by Laser Thermography. Eng. Proc. 2021, 8, 8. [Google Scholar] [CrossRef]Publisher's Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations. © 2022 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/). Share and Cite MDPI and ACS Style Bison, P.; Cadelano, G.; D'Acunto, M.; Ferrarini, G.; Maldague, X.; Moroni, D.; Raimondi, V.; Rogalski, A.; Sakagami, T.; Strojnik, M.; Volinia, M. 16th International Workshop on Advanced Infrared Technology and Applications (AITA 2021). Eng. Proc. 2021, 8, 34. https://doi.org/10.3390/engproc2021008034 AMA Style Bison P, Cadelano G, D'Acunto M, Ferrarini G, Maldague X, Moroni D, Raimondi V, Rogalski A, Sakagami T, Strojnik M, Volinia M. 16th International Workshop on Advanced Infrared Technology and Applications (AITA 2021). Engineering Proceedings. 2021; 8(1):34. https://doi.org/10.3390/engproc2021008034 Chicago/Turabian Style Bison, Paolo, Gianluca Cadelano, Mario D'Acunto, Giovanni Ferrarini, Xavier Maldague, Davide Moroni, Valentina Raimondi, Antoni Rogalski, Takahide Sakagami, Marija Strojnik, and Monica Volinia. 2021. "16th International Workshop on Advanced Infrared Technology and Applications (AITA 2021)" Engineering Proceedings 8, no. 1: 34. https://doi.org/10.3390/engproc2021008034 Find Other Styles Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here. Article Metrics No No Article Access Statistics Multiple requests from the same IP address are counted as one view.

Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.