The Impact of Increase in Lateral Length on Production Performance of Horizontal Thermal Wells
Notice bibliographique
Résumé
Abstract Drilling the horizontal wells was the beginning of unlocking the enormous potential of Western Canada oil-sands. However, several technical and operational challenges avoid the so-called extended reach Steam Assisted Gravity Drainage (SAGD) wells. The last few years drive to reduce Capital Expenditures (CAPEX) encouraged the development of key innovative tools to make long thermal wells a reality. SAGD pad development using maximum possible well-length has taken significant leaps in economical assessment of SAGD projects. The goal of this paper is investigating the impact of Flow Control Devices (FCDs) on the overall performance of the long wells in SAGD projects. In this paper, seven major thermal projects in Western Canada were investigated. Production history of all the wells is normalized by the variation of the geological condition, operational parameters, and well length. Following a convention in the industry, the wells with lateral length longer than 850 meters are labeled as "long" and those shorter than 850 meters are labeled as "short". Eventually, normalized oil production by long wells completed or retrofitted with FCDs is compared with those without FCDs to supply insight on the role of completion design on relative performance of drilling long wells. The comparison has been conducted with respect to different completion types such as Liner or Tubing Deployed FCDs (LDFCD or TDFCDs). On average, long wells produced 2% more normalized oil compared to short wells for all projects, while they produced on average 16% more normalized oil in the projects 1, 2, 6, and 7 in which long wells successfully drilled. The historical production performances show that FCDs are the key enablers and innovative strategy to drill longer wells. For successful long wells with FCDs, the normalized oil production is improved as high as 81%, and the improvement rate is 108% and 10% for LD and TD FCDs, respectively. Furthermore, the completion strategy of combining long wells with FCDs improved the normalized oil production about 33% compared to short wells. This study shows that switching from short wells to long wells in SAGD projects and completing them with FCDs is a synergic approach to increase the oil production (33%). The results of this paper confirmed that drilling long wells with FCDs is a win-win strategy resulted in more oil production compared to long/ short wells without FCDs; since CAPEX is reduced by long wells and oil production is increased by FCDs. The results also help completion and production engineers to get a better understanding of the contribution of FCDs in long lateral wells.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,001 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,001 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,001 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,001 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».