MétaCan
Menu
Retour à la cohorte
Enregistrement W4220859952 · doi:10.4043/31554-ms

First Field Deployment of Erosion Control Technology for High Sand Production Wells in Offshore Malaysia

2022· article· en· W4220859952 sur OpenAlex

Pourquoi ce travail est dans la base

Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.

affAu moins un auteur déclare une institution canadienne dans l'instantané OpenAlex épinglé.

Notice bibliographique

RevueOffshore Technology Conference Asia · 2022
Typearticle
Langueen
DomaineEngineering
ThématiqueHydraulic Fracturing and Reservoir Analysis
Établissements canadiensIntecsea (Canada)
Organismes subventionnairesnon disponible
Mots-clésWellheadErosionPipingSubmarine pipelinePipeline transportErosion controlEnvironmental scienceChokeGeotechnical engineeringEngineeringPetroleum engineeringGeologyEnvironmental engineering

Résumé

récupéré en direct d'OpenAlex

Abstract Sand production in oil and gas fields severely affects multiphase flow pipelines, piping and production facilities result in erosion damages and operational difficulties including valves, bends and other geometric fittings leading to loss of primary containment (LOPC). Presently, there is no technology available which can control sand erosion in real-time and help optimize production. This paper aims to present the first field deployment of a uniquely engineered flow modification device in debottlenecking a high sand producing well and maximizing production while reduction in erosion. The sand erosion challenge can be overcome by using a patented Erosion Control Technology (ECT), to deflect and redistribute sand in the product flow stream. ECT has been successfully developed and validated through three test programs between 2016-2019. Following these, ECT technology maturity has been qualified for field application and selected to be deployed by PETRONAS, in one of the offshore fields located in Sabah, Malaysia, which is currently experiencing high erosion due to high sand production. The ECT pipe spool consists of a 3D printed Inconel 718 alloy insert integrated into carbon steel pipe to protect an elbow from sand erosion within the topsides wellhead piping system upstream of the wellhead choke. A control elbow upstream of the ECT device has also been installed to act as a mean of comparison throughout the pilot. The protected elbow and control elbow will be monitored using manual UT at marked locations to measure localized wall thickness variation over the pilot testing period. The pilot is part way through its test program having been installed and commissioned at the end of 2021. Photos of the arrangement are shared in this paper along with the baseline wall thickness measurement. The pilot trial success criteria are to show that the protected elbow will have minimal wall loss compared to the control elbow showing the effectiveness of ECT. The pilot expects ECT to reduce erosion due to sand and safeguard the facilities as well as maximize well production in preventing shortfall in total field production.

Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.

Prédiction distillée sur la base complète

Imitation des enseignants

Ni prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.

score de la tête « metaresearch » (Codex)0,000
score de la tête « metaresearch » (Gemma)0,000
Version: codex-gemma-dda1882f352aStatut de validation: machine_predicted_unvalidated
Catégories candidatesaucune
Catégories consensuellesaucune
DomaineSignal candidat: aucune · Signal consensuel: aucune
Devis d'étudeSignal candidat: Simulation ou modélisation · Signal consensuel: aucune
GenreSignal candidat: Empirique · Signal consensuel: Empirique
Score de désaccord entre enseignants0,703
Score d'incertitude au seuil0,957

Scores Codex et Gemma par catégorie

CatégorieCodexGemma
Métarecherche0,0000,000
Méta-épidémiologie (sens strict)0,0000,000
Méta-épidémiologie (sens large)0,0010,000
Bibliométrie0,0010,001
Études des sciences et des technologies0,0000,000
Communication savante0,0000,000
Science ouverte0,0010,000
Intégrité de la recherche0,0000,001
Charge utile insuffisante (le modèle a refusé de juger)0,0000,000

Scores machine (provisoires)

Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.

Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.

Tête enseignante Opus0,007
Tête enseignante GPT0,210
Écart entre enseignants0,204 · la distance entre les deux têtes enseignantes sur ce seul travail
Statut de validationscore_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle