Development of X-ray Coherent Scatter Projection Imaging Systems
Notice bibliographique
Résumé
Coherent scatter x-ray imaging systems are sensitive to material structure and chemical composition, and generate images with contrast superior to conventional transmission xray imaging.The goal of this thesis was to develop a scatter projection imaging system capable of acquiring images in less than ten minutes, in the range of nuclear medicine scans, to be practical for future applications such as bone specimen imaging.Two systems were developed.The first improved on the group's previous work and was configured at the Canadian Light Source synchrotron.It employed five 33.2 keV pencil beams in combination with continuous object motion.The system consisted of a primary collimator, motorized stages for object translation, a flat-panel x-ray detector for measuring scattered x rays, and discrete photodiodes for simultaneously measuring transmitted x rays.The acquisition time for a 5.0 cm × 9.0 cm object with 8425 pixels was 2.3 min.Use of continuous motion acquisition increases the width of image boundaries by the product of the object translation speed and the acquisition time per pixel.Contrast-detail performance was independent of acquisition speed.Pixel signal-to-noise ratio (SNR) measurements indicated that the scatter data were limited by the detector readout noise.The synchrotron system was a development stage in an idealized environment but a practical system requires a commonly available x-ray source.Therefore, a second system was developed using a conventional rotating-anode x-ray tube.An array of up to three rows by five columns of pencil beams can irradiate the object simultaneously.A 110 kVp spectrum with 2.25 mm of added Al filtration was used.Motorized stages translate the object through the beams for step-and-shoot acquisition.For this first x-ray tube-based system, the primary imaging capability was not optimized and transmitted x rays are mea-My sincerest thanks go to my supervisor Paul Johns who provided help, suggestions, and support throughout my graduate studies.At the BMIT facility at the Canadian Light Source (CLS), special thanks go to George Belev, now at the Saskatchewan Structural Sciences Centre, who worked with us late into the night to ensure we had a working system to complete our experiments in the allocated beam time.Thanks also to BMIT staff
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,001 | 0,001 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,001 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,001 | 0,001 |
| Science ouverte | 0,001 | 0,001 |
| Intégrité de la recherche | 0,001 | 0,001 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,004 | 0,003 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».