Development and Characterization of Cast Modified SI-CU-MG Alloys for Heat Resistant Power Train Applications
Notice bibliographique
Résumé
High temperature tensile, compression and low cycle fatigue tests were performed to assess the influence of micro-additions of Ti, V and Zr on the Al-7Si-1Cu-0.5Mg (wt.%) alloy in the as-cast and heat treated conditions. A combination of electron microscopy and high temperature X-ray diffraction was used to identify phases and temperature ranges of their thermal stability. The microstructure of the as-cast Al-7Si-1Cu-0.5Mg (wt.%) base and modified alloys consisted of α-Al, eutectic Si, and Cu-, Mg- and Fe-based phases Al2.1Cu, Al8.5Si2.4Cu, Al7.2Si8.3Cu2Mg6.9 and Al14Si7.1FeMg3.3. In addition, the micro-sized Ti/V/Zr-rich phases Al6.8Si1.4Ti, Al21.4Si4.1Ti3.5VZr3.9, Al6.7Si1.2TiZr1.8, Al2.8Si3.8V1.6Zr and Al5.1Si35.4Ti1.6Zr5.7Fe were identified in the modified alloys. During solution treatment, Cu- and Mg- based phases were completely dissolved, while the eutectic silicon, Fe- and Ti-V-Zr-rich intermetallics partially dissolved. The TEM analysis confirmed the presence of nano-sized precipitates of (AlSi)3(TiVZr) with D023 tetragonal crystal structure. The tensile tests of the alloy in the as-cast state showed that with increasing testing temperature from 25°C to 400°C the yield strength and tensile strength of the studied alloy decreased from 161 MPa to 84 MPa and from 261 MPa to 102 MPa, respectively. Accordingly, the T6 heat treated alloy modified with additions of a higher content of Ti-V-Zr achieved the highest tensile strength of 343 MPa over the base alloy and alloys modified with additions of Ti, Ti-Zr and lower contents of Ti-V-Zr. The fatigue life of the studied alloy in the T6 condition was substantially longer than those of the reference alloys A356 and the same Al-7Si-1Cu-0.5Mg base alloy with lower additions of V, Zr and Ti in the T6 condition. The fractography revealed tensile crack propagation through the eutectic Si and primary phases, exhibiting intergranular fracture along with some cleavage-like features of the plate-shaped Ti-V-Zr-rich intermetallics with a presence of fatigue striations on the latter, indicating their ductile nature. It is believed that the intermetallic precipitates containing Zr, Ti and V improve the fatigue life of the studied alloy in the T6 condition.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,001 | 0,001 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».