Centrifuge Options for Production of 'Dry Stackable Tailings' in Surface Mined Oil Sands Tailings Management
Notice bibliographique
Résumé
Abstract Water availability is beginning to impact oil sands development and as a result, several technologies to increase the percentage of recycle water are being evaluated. One such option which is being re-evaluated is the use of centrifuges to produce a dry tailings which can accommodate overburden and soil replacement. Previous evaluations of centrifuge performance to capture water from the clay and silt tailings (mature fine tailings) components demonstrated some success, but at the time unacceptable costs. A better appreciation of the long term costs of mature fine tailings storage has prompted a reevaluation of centrifuge technology. The use of additives to improve centrifuge performance has significantly improved the results which can be achieved. Aside from the obvious positive environmental benefit of reclaiming the fluid fine (mature fine) tailings, the increase in the amount of water recycled will decrease the requirement to use the limited water in the Athabasca river. This paper discusses a laboratory scale study of the water chemistry and clay/silt feed properties which affect centrifuge performance, along with 20 tonne per hour pilot scale results. Introduction The term dry stackable tailings is commonly used in oil sands tailings management to mean a mineral stream left over from the bitumen extraction process which can be stored without the need for dikes or other fluid containment structures. The water required for the bitumen extraction process results in mineral tailings streams in the form of slurries or suspensions, that require containment. In general, surface mined oil sands tailings fall into three categories: sand tailings, fine tailings, and froth treatment tailings. Although the froth treatment tailings have important environmental implications due to their contamination with solvents or diluents from the froth treatment process, they are generally combined with the other tailings prior to discharge into the recycle water area (tailings settling pond). Typically it is a straightforward process to create dry stackable tailings from the sand tailings, and they are often used to build the containment for the remaining fluid fine tailings. It is another common practice for the surface mined oil sands industry to define sand as mineral particles greater than 44 microns. Fines are therefore less than 44 micron, and this definition can be useful when discussing the long very clearly, however, that it is the clay content that determines all of the important properties of the fine tailings or fluid fine tailings. (or mature fine tailings, when the solids content exceeds about 25%)(1–3). Over the entire mine, of course, the average clay to fines content is fixed, and the fines content can be a useful approximation tool for large scale planning purposes and the prediction of sand volumes and the fine tailings volume that will require containment. The clay content, often expressed as a clay to fines ratio, can vary across an oil sands lease by as much as a factor of
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,001 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».