Investigating the Effect of Non-Uniform Microporous Layer Intrusion on Oxygen Transport in Dry and Partially Saturated Polymer Electrolyte Membrane Fuel Cell Gas Diffusion Layers
Notice bibliographique
Résumé
State-of-the-art gas diffusion layers (GDL) used in polymer electrolyte membrane (PEM) fuel cells have a bi-layered structure comprising of a carbon fiber substrate and a microporous layer (MPL). Addition of the MPL has been shown to improve the fuel cell performance [1-2]. Earlier studies have also shown that the configuration of the MPL relative to the GDL has an effect on gas transport through the combined diffusion medium [3-4]. This study investigates the effect of the MPL intrusion and morphology on the oxygen transport in PEM fuel cell GDLs. In particular, we investigate the effect of varying MPL layer characteristics, both interior and exterior to the carbon fiber substrate in dry and saturated conditions, on the oxygen diffusivity and liquid water saturation at breakthrough conditions. Stochastic generation methods were utilized to create GDLs with varying MPL intrusion depths and morphologies. The generated morphologies of the non-uniform MPL layers were validated using reconstructed microscale X-ray-computed tomography. Pore network modelling was applied to simulate the oxygen transport behavior within these stochastically generated materials. The liquid water saturation was calculated using an invasion percolation algorithm. Three distinct scenarios were studied: varied MPL intrusion depth, varied MPL outer layer thickness, and constant MPL thickness with varied intrusion depth. In controlling the MPL intrusion, it was found that ~50-60 µm is the critical MPL thickness beyond which the saturated oxygen effective diffusion coefficient rapidly increases and the substrate saturation rapidly decreases (Figure 1). This study suggests that when the GDL is invaded by liquid water through cracks in the MPL, preferential MPL configurations exist for improving oxygen transport and minimizing substrate saturation. The results of this study can be used to guide the continued improvement of MPL fabrication. References [1] J. Lee, R. Yip, P. Antonacci, N. Ge, T. Kotaka, Y. Tabuchi, and A. Bazylak, “Synchrotron Investigation of Microporous Layer Thickness on Liquid Water Distribution in a PEM Fuel Cell,” J. Electrochem. Soc., vol. 162, no. 7, pp. F669–F676, Apr. 2015. [2] Z. Qi and A. Kaufman, “Improvement of water management by a microporous sublayer for PEM fuel cells,” J. Power Sources, vol. 109, no. 1, pp. 38–46, 2002. [3] C. Chan, N. Zamel, X. Li, and J. Shen, “Experimental measurement of effective diffusion coefficient of gas diffusion layer/microporous layer in PEM fuel cells,” Electrochim. Acta, vol. 65, pp. 13–21, 2012. [4] N. Zamel, J. Becker, and A. Wiegmann, “Estimating the thermal conductivity and diffusion coefficient of the microporous layer of polymer electrolyte membrane fuel cells,” J. Power Sources, vol. 207, pp. 70–80, 2012. Figure 1
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».