Notice bibliographique
Résumé
Cycloidal and planetary gear drives are considered for the actuation of an electrically powered morphing winglet. A torque of 6723 N*m is required at the winglet hinge. The stepper motor selected as the electrical actuator is the HT34-487 stepper motor. This motor can provide a torque of approximately 6 N*m. The cycloidal drive consists of the selected stepper motor, a bevel gearbox, and a two-stage cycloidal gearbox. The bevel gearbox is used to change the axis of rotation of the stepper motor from span-wise direction to chord-wise direction. Stage one of the cycloidal gearbox contains an input shaft, two cycloidal disks with 180 degrees offset rotation, an eccentric cam and an output shaft. The cycloidal disks in stage one have 35 lobes, providing a gear ratio of 35:1. The second stage of the cycloidal gearbox consists of only one cycloidal disk with 34 lobes, providing a gear ratio of 34:1. The total gear ratio of the cycloidal drive is 1190:1. Material selection and FEA simulations are performed on the components in the cycloidal drive to ensure the selected materials can withstand the applied loads. A differential planetary gear drive is also considered to actuate an electrically powered morphing winglet. Spur gears are selected to be used as the sun and planet gears. A ratio of 180:1 is achieved in the planetary gear drive. Using gear tooth bending calculators, it is found that designing spur gears to withstand the loads of the electrically powered morphing winglet and to fit inside the dimensions of the wingbox is not feasible.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,002 | 0,001 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».