Evaluating Flexural Performance of Repaired Reinforced Concrete Beams under Static and Repeated Loading Using Non-Destructive Methods
Notice bibliographique
Résumé
Deterioration of concrete structures is one of the major issues faced by the construction industry. Repair and rehabilitation are necessary to extend the service life of such structures. This study aims to investigate the effect of repair material type, length of repaired region, and loading regime on the structural characteristics of the repaired reinforced concrete (RC) beams. To achieve this goal, a total of 30 repaired and non-repaired RC beams were prepared and tested under static and repeated loading conditions. Three types of sounding-based non-destructive test (NDT) methods are employed to determine the material deterioration and sub-surface delamination after repeated loading. Results showed that under static loading conditions, full-length repaired beams had better performance than 1/3-span repaired beams. Beams repaired with cementitious repair mortar containing modified binder and cementitious repair concrete in full length had a yield strength that was 14% and 9%, respectively, higher than that of beams repaired in 1/3 span. All RC beams with full-span repair outperformed the intact beams. After repeated loading, beams repaired with cementitious repair with modified binder over full length showed a 14% improvement in yield strength compared to control samples. It was found that repair materials that had a high compressive and flexural strength are beneficial. The resonant frequency drops correlate well with the yield strength results. The formulas proposed by Canadian Standards Association (CSA) 23.3 can effectively predict the moment resistance of both intact (control) and repaired RC beams. The ratio of experimental moment resistance values to its predictions ranges from 0.91 to 1.04.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,001 | 0,001 |
| Méta-épidémiologie (sens strict) | 0,001 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,001 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,001 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».