INVESTIGATION OF THE DISTRIBUTION OF RESIDUAL STRESSES IN THE ZONE OF THE WELDED SEAM OF RAILS OF THE R65 TYPE OF THE DT350 CATEGORY
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
Rails are the most important element of the superstructure of the railway track. To increase the smoothness of the ride, reduce dynamic loads at the junctions of the rails, contact welding of rails in a whip in stationary conditions and aluminothermic welding directly on the way are becoming more common. Despite the improvement in the quality of the joints, the zone of welded joints, due to a change in the structure due to the physical processes of welding and heat treatment, is still a place with lower mechanical characteristics compared to the metal of solid- rolled rails. The development of defects in welded butt joints is one of the main reasons for removing rails from service. An important component of ensuring the quality of rails and welded joints is the formation of a favorable diagram of residual stresses. In order to assess the effect of induction heating and hardening, a study was made of the distribution of residual stresses before and after heat treatment of the welded joint, full-profile samples of R65 type rails of the DT350 category of steel grade E76HF, the current production of EVRAZ ZSMK JSC. It has been established that compressive residual stresses predominate in the rail head both before and after heat treatment,heating reduces the overall stress level to the level of 210–264MPa, the maximum compressive stress level equal to 586 MPa is fixed at joint No. 224, after hardening heat treatment. Tensile stresses predominate in the neck of the rail, a sharp increase in stresses after hardening heat treatment was noted, the stress level increased more than three times, from 68 MPa to 254 MPa. After heating the welded joint, a slight decrease in residual stresses in this area is observed. Compressive stresses are recorded in the rail sole, with identical diagram, regardless of heat treatment. A minimum of stress is fixed in the center of the sole, with a subsequent increase towards the edge of the feather. The greatest difference was recorded after hardening heat treatment, from 57MPa to 537MPa, respectively.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,001 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,001 |
| Études des sciences et des technologies | 0,000 | 0,001 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,001 | 0,001 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle