Selective breaking and re-joining of CuO nanowires by nanosecond laser irradiation
Notice bibliographique
Résumé
Nanostructures incorporating copper oxide (CuO), a narrow bandgap p-type semiconductor, are well suited for applications such as gas/biosensors, field emission devices, and photodetectors. However, the use of CuO nanocomponents in these applications is currently limited by the availability of fabrication and in situ processing techniques. In this paper, we show that the electrical and mechanical properties of CuO nanowire (NW) networks can be adjusted through sequential processing with nanosecond laser radiation. This new two-stage process involves selective breakage/cleaving of CuO NWs with an initial set of laser pulses, followed by irradiation with a second set of laser pulses applied in an optimized orientation to tailor bonding and junction formation between pairs and bundles of previously separated CuO NWs. We find that stage one processing introduces a high concentration of oxygen vacancies in NWs leading to the nucleation of dislocations and high strain. This localized strain is responsible for the breaking of individual NWs, while the high oxygen vacancy concentration modifies the electrical conductivity within each NW. The second stage involves re-orientation of the laser beam, followed by additional laser irradiation of the NW network. This has been found to result in the bonding of NWs and the creation of junctions in regions where CuO NWs are in contact. Laser-induced heating under these conditions produces melting in the contact areas between NWs and is accompanied by the reduction of CuO to form Cu2O as verified via XPS and Raman analysis. XRD and TEM observations demonstrate that plastic deformation within CuO NWs dominates in stage one laser processing. The enhancement of electrical conductivity observed, following stage two processing, is attributed due to an increase in the concentration of laser-induced oxygen vacancies as well as the formation of localized bridging and junction sites in the overall NW network.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».