News and views

The World Health Organization (WHO) ranks antibiotic resistance as one of the top 10 threats to global health. There is therefore a great need for new solutions to tackle resistant bacteria and reduce the use of antibiotics. A group of researchers at Chalmers University of Technology in Sweden are now presenting a new spray that can kill even antibiotic-resistant bacteria, and that can be used for wound care and directly on implants and other medical devices. “Our innovation can have a dual impact in the fight against antibiotic resistance. The material has been shown to be effective against many different types of bacteria, including those that are resistant to antibiotics, such as Methicillin-resistant Staphylococcus aureus (MRSA), while also having the potential to prevent infections and thus reduce the need for antibiotics,” says Martin Andersson, head of research for the study and professor at the Department of Chemistry and Chemical Engineering at Chalmers. It is already estimated that antibiotic-resistant bacteria cause nearly 1.3 million deaths a year worldwide. As part of the effort to slow down the spread and development of drug resistance, researchers at Chalmers are developing a new antibacterial material that can be used in health care and become an effective tool to fight antibiotic resistance. The material consists of small hydrogel particles equipped with a type of peptide* that effectively kills and binds bacteria. Attaching the peptides to the particles provides a protective environment and increases the stability of the peptides. This allows them to work together with body fluids such as blood, which otherwise inactivates the peptides, making them difficult to use in health care. In previous studies, the researchers showed how the peptides can be used for wound care materials such as wound dressings. They have now published two new studies in which the bactericidal material is used in the form of a wound spray and as a coating on medical devices that are introduced into our bodies. This new step in the research means that the innovation can be used in more ways and be of even greater benefit in health care. The wound spray, which can reach into deep wounds and other open areas on the body where bacteria can enter, is flexible and very useful for treating and preventing infection. The new material has many advantages over existing sprays and disinfectants. “The substance in this wound spray is completely non-toxic and does not affect human cells. Unlike existing bactericidal sprays, it does not inhibit the body's healing process. The materials, which are simply sprayed onto the wound, can also kill the bacteria in a shorter time,” says Edvin Blomstrand, an industrial doctoral student at the Department of Chemistry and Chemical Engineering at Chalmers University of Technology and one of the lead authors of the scientific article. For treatments in which materials such as implants and catheters are inserted into our bodies, infections are a major problem. Therefore, there is a great need for new antibacterial biomaterials, that is, materials that treat, replace, or modify organs, tissue, or functions in a biological body. One of the major sources for hospital-acquired infection comes from the usage of urinary catheters. The Chalmers researchers' new coating can now be an effective new tool for reducing this risk and preventing infections. “Although the catheters are sterile when unpacked, they can become contaminated with bacteria while they are being introduced into the body, which can lead to infection. One major advantage of this coating is that the bacteria are killed as soon as they come into contact with the surface. Another is that it can be applied to existing products that are already used in healthcare, so it is not necessary to produce new ones,” says Annija Stepulane, a doctoral student at the Department of Chemistry and Chemical Engineering at Chalmers and one of the lead authors of the article. In the study, the researchers tested the coating on silicone materials used for catheters, but they see opportunities to use it on other biomaterials. The research on the antibacterial materials is being conducted in collaboration with the spin-off company Amferia AB, which is also commercialising the technology. Chalmers and Amferia have previously presented the antibacterial material in the form of hydrogel wound dressings, which are presently under clinical investigation for both human and animal wound care. The Chalmers researchers' new coating can now be an effective new tool for reducing this risk and preventing infections. A soldier suffers a serious gunshot wound on a remote battlefield or a machinist has a work accident and was stuck in traffic on the way to the hospital. Secondary, uncontrolled bleeding from traumatic injury is the leading cause of death of Americans from ages 1 to 46. Amir Sheikhi, assistant professor of chemical engineering and of biomedical engineering at Penn State, has a plan to change that with a novel microneedle patch that can immediately stop bleeding after injury. He laid out his prototype in a new paper that will be published in the May issue of Bioactive Materials, available now online. “Excessive bleeding is a serious challenge for human health,” Sheikhi said. “With hemorrhaging injuries, it is often the loss of blood -- not the injury itself -- that causes death. There is an unmet medical need for ready-to-use biomaterials that promote rapid blood coagulation”. The haemostatic microneedle technology developed by Sheikhi can be applied like a typical adhesive bandage to quickly stop bleeding. The biocompatible and biodegradable microneedle arrays (MNAs) on the patch increase its surface contact with blood and accelerate the clotting process. The needles also increase the adhesive properties of the patch via mechanical interlocking to promote wound closure. “In vitro, the engineered MNAs reduced clotting time from 11.5 minutes to 1.3 minutes; and in a rat liver bleeding model, they reduced bleeding by more than 90%,” Sheikhi said. “Those 10 minutes could be the difference between life and death.” The MNA patch can be compared with the hydrogel technology that is currently used to treat bleeding wounds in hospitals, but hydrogel applications require preparation and medical expertise. The microneedle patch is pre-engineered for immediate application that anyone can use to stop bleeding, Sheikhi said, much like a typical over-the-counter adhesive bandage. Microneedles—which are already in use to deliver biologics, such as cells or drugs, through the skin or for cosmetic procedures to stimulate collagen production—are tiny, making their application pain-free, according to Sheikhi. The researchers are now working to translate the patch from the lab to the market, with plans to further test the technology. All the animal experiments were carried out after the approval of animal protocol by the UCLA Animal Research Committee. Animal handling procedures were performed following the “Guide for the Care of Laboratory Animals.” Sheikhi started this work as a postdoctoral scholar at the University of California, Los Angeles, in the lab of Ali Khademhosseini, now the chief executive officer of Terasaki Institute for Biomedical Innovation (TIBI). Other UCLA contributors include Reihaneh Haghniaz, Hossein Montazerian, Avijit Baidya, Maryam Tavafoghi and Yi Chen. Han-Jun Kim, Yangzhi Zhu and Solmaz Karamikamkar, all formerly with the Khademhosseini Lab and now all affiliated with TIBI, also contributed. Sheikhi received financial support from the Canadian Institutes of Health Research through a postdoctoral fellowship as well as the startup fund from The Pennsylvania State University. 3M has a new documentary film called, "Skilled,” to celebrate the skilled trades and break down stereotypes that may prevent people from pursuing these vital careers. “Skilled” features four trade workers—a plumber, fall protection specialist, welder, and film gaffer—at various stages in their careers and highlights the meaningful opportunities offered within the trades. “At 3M, we're working to increase awareness around the variety of opportunities available in the trades and support students who choose these exciting career paths,” said James Momon, chief equity officer, 3M. “Skilled workers are vital to our global communities and economies. Because access to education and opportunity remains inequitable, we are focused on sharing ‘Skilled’ in classrooms and advancing our global commitment to create 5 million unique skilled trades and STEM learning experiences for underrepresented individuals by the end of 2025.” In addition to this enterprise-level goal at 3M, the company's Safety & Industrial Business Group (SIBG) will leverage its people, products, and community partnerships to advance equity in the skilled trades. To increase awareness of the skilled trades as a viable career, the business group is engaging underrepresented students and young adults interested in vocational training for jobs. SIBG is also actively identifying community partnerships that support skilled trade occupations their customers are working to fill, while connecting students and young adults to hands-on training and certification opportunities. “Within SIBG, we're on a mission to transform the way work gets done,” said Mike Vale, group president, 3M Safety and Industrial Business Group. “Our innovative products and solutions are an important part of that, but we also need to foster a transformative mindset in our people and the industries we serve. Supporting skilled trades will shape the future of work, grow the talent pool for critical jobs, and fulfill the pressing demands of the global economy.” “Skilled” is designed to spark a conversation about the realities of the skilled trades and address stereotypes that may discourage people from pursuing them. It was inspired by 3M State of Science Index, a global original research study that confirms while skilled trade workers are widely respected, a majority believe there is a negative stigma around the trade professions. The study found 9 in 10 people believe more individuals would pursue a trade career if perceptions of the field improved. In addition, 93% believe the skilled trade workforce needs more people and 92% see consequences if their country cannot find a solution to the shortage of workers, from declines in overall quality of life, to negative economic impact, neglected public infrastructure, and safety risks. 3M has also partnered with Teach for America, an organisation committed to educational equity and excellence, to promote and screen “Skilled” in 2023. The film will be shown in classrooms led by Teach For America educators—reaching up to 30 000 students—and supported by discussion guides to facilitate open conversation about the skilled trades and the opportunities available. “Skilled” was directed by documentary filmmaker Julio Palacio and produced by Christine Arena (“Let Science Speak,” “Not the Science Type”) of Generous Films and 3M. To learn more about “Skilled” visit 3M.com/Skilled. “Skilled” is not an official selection of the 2023 Sundance Film Festival, although 3M is a proud supporter of Sundance Institute.

Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.