Robust Polyurethane Coatings with Lightly Cross-Linked Surfaces for Ice Shedding
Notice bibliographique
Résumé
A highly cross-linked coating tends to have a high shear modulus and ice adhesion strength, while a lightly cross-linked rubber lacks wear resistance but sheds ice readily. This paper reports a polyurethane (PU) coating that is heavily cross-linked in the bulk but is lightly cross-linked near its surface (LICROS) for ice shedding. To achieve this, two methacrylate polyols (P1 and P2) are synthesized by free radical polymerization. Of the polyols, P1 is rich in cross-linkable 2-hydroxyethyl methacrylate (HEMA) units and P2 is rich in non-cross-linkable 2-ethylhexyl methacrylate (EHMA) units and also contains 4.1 mol % of 2-(perfluorohexyl)ethyl methacrylate (FC 6 -MA) units. Solvent evaporation from a solution mixture of P1, P2, and a hexamethylene diisocyanate trimer (HDIT) causes P2 to stratify to the coating’s surface due to the low surface tension of FC 6 -MA. After thermal curing and lubrication with dibutyl phthalate (DBP), the resulting LICROS coatings feature ice adhesion values (τ) that are around one-fourth of those measured on the homogeneous PU coating derived from curing P1 with HDIT. However, the τ values of the DBP-lubricated coatings quickly increase with the number of icing/de-icing cycles presumably due to the shedding of the highly swollen surface layer with ice removal. The lubrication of an optimized LICROS coating with acetyl tributyl citrate (ATBC), which swells the coating much less than DBP, sustains low τ values of ∼60 kPa for 15 icing/de-icing cycles without showing signs of deterioration. LICROS coatings have nanoindentation hardness and wear resistance comparable with those of the cured homogeneous P1 coating but much better than those of the cured P2 coating. Since a robust LICROS coating can be made from P1 and P2 at a mass ratio of 97.5/2.5, the weight fraction of the expensive FC 6 -MA component used in the final coating is only 0.12%. Thus, this paper reports an approach to making inexpensive coatings with low ice adhesions but high wear resistance.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,001 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,001 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,001 | 0,000 |
| Science ouverte | 0,001 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,001 | 0,001 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; les deux têtes enseignantes s’accordent sur ce qui est montré ici.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».