Effect of Biobased SiO2 on the Morphological, Thermal, Mechanical, Rheological, and Permeability Properties of PLLA/PEG/SiO2 Biocomposites
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
Nowadays, companies and researchers are concerned about the negative consequences of using synthetic polymers and direct their efforts to create new alternatives such as biocomposites. This study investigated the effect of biobased SiO2 on the properties of poly(L-lactic acid)/SiO2 (PLLA/SiO2) and poly(L-lactic acid)/SiO2/poly(ethylene glycol) (PLLA/SiO2/PEG) composites. The SiO2 was obtained from rice husk incineration and mixed with PLLA at various concentrations (5, 10, and 15 wt.%) via melt extrusion before compression molding. Furthermore, PLLA/SiO2/PEG composites with various PEG concentrations (0, 3, 5, and 10 wt.%) with 10 wt.% SiO2 were produced. The sample morphology was studied by scanning electron microscopy (SEM) to analyze the dispersion/adhesion of SiO2 in the polymer matrix and differential scanning calorimetry (DSC) was used under isothermal and non-isothermal conditions to study the thermal properties of the samples, which was complemented by thermal stability study using thermogravimetric analysis (TGA). Rheological analysis was performed to investigate the viscoelastic behavior of the composites in the melt state. At the same time, tensile mechanical properties were obtained at room temperature to determine their properties in the solid state. DSC and X-ray diffraction analysis (XRD) were combined to determine the crystalline state of the samples. Finally, gas permeation measurements were performed using a variable pressure (constant volume) method to analyze the permeability of different gases (CO2, CH4, O2, and H2). The results showed that SiO2 decreased the PLLA chain mobility, slowing the crystallization process and lowering the gas permeability while increasing Young’s modulus, thermal stability, and viscosity. However, PEG addition increased the crystallization rate compared to the neat PLLA (+40%), and its elongation at break (+26%), leading to more flexible/ductile samples. Due to improved silica dispersion and PLLA chain mobility, the material’s viscosity and gas permeability (+50%) were also improved with PEG addition. This research uses material considered as waste to improve the properties of PLA, obtaining a material with the potential to be used for packaging.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,006 | 0,001 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,001 | 0,000 |
| Bibliométrie | 0,000 | 0,001 |
| Études des sciences et des technologies | 0,000 | 0,003 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,001 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle