Droplet splitting in multi‐furcating microchannel: A three‐dimensional numerical simulation study
Notice bibliographique
Résumé
Abstract This work investigates the splitting of a droplet in a multi‐furcating microfluidic channel for a two‐phase system employing 3D simulation. The simulations were performed using an explicit volume of fluid (VOF) method and have been validated using experimental data taken from the literature. The width ratio of the branch channel to the main channel is set to 0.25 for five branches of the multi‐furcating microchannel, as it is the width ratio at which multiple splitting takes place. Simulations have been carried out at different oil velocities ( V o ) ranging from 0.12 to 0.22 m/s and at different water velocities ( V w ) ranging from 0.002 to 0.10 m/s. Oil fraction data in the main channel has been recorded and compared with the homogenous model. The average difference between the homogeneous model and the 3D simulations is 22.68%. Analysis of dimensionless droplet length in ±0°, ± 40°, and 90° branch channels has been done. α (length of the droplet in branch channel/width of the main channel) increases up to a flow rate ratio of 0.38, and then decreases, whereas β (length of the droplet in the main channel/width of the main channel) increases with an increase in flow rate ratio. A flow pattern map has been developed to identify the various droplet breakup regimes at the junction. Frequency (counts per unit time) of droplet generation increases with capillary number for all the branch channels except for the 0° branch channel, where the regime is that the droplet passes through three branch channels. The volume distribution ratio ( λ ) decreases at first, then increases with an increase in capillary number for 0°:90° and 40°:90° angle branch channels for the regime where the droplet passes through five branch channels. For the regime where the droplet passes through three branch channels, the trend is likely linear with λ = 0.3 ± 0.04. The dimensionless mother droplet length increases with an increase in capillary number for V o = 0.13 and 0.16 m/s, but for V o = 0.19 and 0.22 m/s, the dimensionless mother droplet length becomes constant after capillary number = 0.26 and 0.30 respectively. The droplet breakup time (t) for regime (a), where the droplet passes through three branch channels, is 0.002 s; for regime (b), where the droplet passes through five branch channels, it is 0.001 s; and for regime (c), where multi‐furcation and coalescence of the droplet occurs, it is 0.0005 s. Multiple splitting is a topic covered in this paper that can be applied to upcoming microfluidic platform‐based devices.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,001 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,001 | 0,001 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,001 | 0,001 |
| Communication savante | 0,001 | 0,000 |
| Science ouverte | 0,001 | 0,000 |
| Intégrité de la recherche | 0,001 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,001 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».