Phase Stability, Microstructure, and Mechanical Properties of Spark Plasma Sintered Nanocrystalline Boron-Doped AlCoFeMnNi High-Entropy Alloy
Notice bibliographique
Résumé
The microstructure and mechanical properties of mechanically alloyed and spark plasma sintered AlCoFeMnNi-xB (x = 0, 0.5, 1, and 5 at. %) high-entropy alloys (HEAs) have been investigated. Boron-doped HEAs were synthesized using mechanical alloying up to 50 h of milling. Synthesized powders were then consolidated at 850, 900, and 950 °C for 10 min under a uniaxial pressure of 40 MPa using spark plasma sintering (SPS). A scanning electron microscope, which was equipped with energy dispersive spectroscopy (EDS), together with an optical microscope (OM) were used to analyze the microstructural evolution. X-ray diffraction analysis was used to differentiate the phases formed in the solution. The mechanical properties of the sintered specimens were analyzed using the shear-punch test (SPT). The fracture surface of the SPT samples was studied using SEM. Thermodynamic calculations revealed that by employing this process, it is possible to produce solid solution HEAs with a duplex FCC + BCC structure. It was shown that boron-doped AlCoFeMnNi high-entropy alloys contain some unique attributes. SPS at 900 °C for a sample with boron up to 0.5 at. % leads to the formation of an alloy with the highest shear strength. A further increase in the boron content in the boron-doped HEAs exhibited a decrease in the maximum shear strength. Finally, the correlations between the microstructural and mechanical characteristics of the sintered boron-containing high-entropy alloys are discussed.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,001 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».