MétaCan
Menu
Retour à la cohorte
Enregistrement W4381619365 · doi:10.11159/ffhmt23.148

Mass transfer and Shear Environment of an Aerated Coaxial Mixer Containing a Shear-thinning Fluid

2023· article· en· W4381619365 sur OpenAlex

Pourquoi ce travail est dans la base

Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.

affAu moins un auteur déclare une institution canadienne dans l'instantané OpenAlex épinglé.
venuePublié dans une revue dont le pays d'attache est le Canada.

Notice bibliographique

RevueProceedings of the ... International Conference on Fluid Flow, Heat and Mass Transfer · 2023
Typearticle
Langueen
DomaineChemical Engineering
ThématiqueRheology and Fluid Dynamics Studies
Établissements canadiensToronto Metropolitan University
Organismes subventionnairesnon disponible
Mots-clésShear thinningShear (geology)AerationMaterials scienceCoaxialThinningComposite materialMechanical engineeringChemistryRheologyEngineering

Résumé

récupéré en direct d'OpenAlex

Gas dispersion in shear-sensitive fluids contained in mechanically agitated tanks is a complex process.This is due to the fact that the fluid viscosity greatly varies with the extent of shear rate [1].As a result, the mixing system efficiency deteriorates under uneven mixing conditions and creation of oxygen depleted zones.In many industries, such as food and pharmaceutical industries, the proper mixing of shear-sensitive fluids is crucial for production of high-quality products [2].Recently, coaxial mixing systems comprising of a central impeller and an anchor impeller demonstrated promising performance in gas dispersion inside shear-thinning fluids in terms of the mass transfer rate, power consumption, and uniform distribution of the shear rate [3,4].However, based on an extensive literature review, the relation between the shear environment and the mass transfer rate generated by the coaxial mixer is not well understood.Hence, this study aims to investigate the mass transfer characteristics of a coaxial mixer at different scales containing a non-Newtonian fluid.Through the application of electrical resistance tomography, gassing-in, and computational fluid dynamics (CFD) methods, the gas hold-up, mass transfer coefficient, and shear environment of the coaxial mixers were evaluated, respectively.In this regard, the impact of the aeration rate, impellers' speed, central impeller type, pumping direction, and rotating mode on the shear environment obtained by the coaxial mixer was analysed.The results of this study showed that the central impeller speed and the rotating mode had significant effects on the mass transfer rate.It was found that both the shear environment and mass transfer obtained in the counter-rotating mode were higher than those attained in the co-rotating mode.The results of this study can be used to optimize mixing conditions for the gas dispersion in shear-sensitive fluids in order to enhance the mass transfer rate at a lower shear environment.Importantly, the data obtained from this study provided valuable insights into the design and scale-up of aerated coaxial mixers, which can be applied in industrial and chemical processing applications.

Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.

Prédiction distillée sur la base complète

Imitation des enseignants

Ni prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.

score de la tête « metaresearch » (Codex)0,000
score de la tête « metaresearch » (Gemma)0,000
Version: codex-gemma-dda1882f352aStatut de validation: machine_predicted_unvalidated
Catégories candidatesaucune
Catégories consensuellesaucune
DomaineSignal candidat: aucune · Signal consensuel: aucune
Devis d'étudeSignal candidat: Expérimental (laboratoire) · Signal consensuel: aucune
GenreSignal candidat: Empirique · Signal consensuel: Empirique
Score de désaccord entre enseignants0,795
Score d'incertitude au seuil0,867

Scores Codex et Gemma par catégorie

CatégorieCodexGemma
Métarecherche0,0000,000
Méta-épidémiologie (sens strict)0,0000,000
Méta-épidémiologie (sens large)0,0000,000
Bibliométrie0,0000,000
Études des sciences et des technologies0,0000,000
Communication savante0,0000,000
Science ouverte0,0000,000
Intégrité de la recherche0,0000,000
Charge utile insuffisante (le modèle a refusé de juger)0,0000,000

Scores machine (provisoires)

Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.

Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.

Tête enseignante Opus0,019
Tête enseignante GPT0,229
Écart entre enseignants0,210 · la distance entre les deux têtes enseignantes sur ce seul travail
Statut de validationscore_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle