Thermal Performance Assessment of Reformed Gas Combustion in O<sub>2</sub> Injection Lance
Notice bibliographique
Résumé
In HYL direct reduced iron (DRI) process, the reformed gas (composed of CO, CO2, CH4, H2, and H2O) from the steam/methane reformer with a temperature of ~1150 K is subjected to pre-heating to provide sufficient temperature for the DRI process (i.e., ~1250 K) in the shaft furnace.Such pre-heating is achieved by the O2/reformed gas combustion.In the HYL process, the O2 is injected through an 'L-shaped lance' penetrating the flow path of reformed gas.The combustion performance is significantly influenced by the lance configuration and O2/reformed gas operating variables such as flow rates and temperature.For example, the formation of local ignitable gaseous composition may lead to issues related to explosion while insufficient O2 velocity at nozzle exit leads to nozzle wear out due to flashback.Therefore, the design of the nozzle in addition to gas flow conditions governs the local mixing of O2 and reformed gas which ultimately influences the local reaction mechanisms and flame formation.In the present work, the fluid flow, reaction mechanisms, and flame stability in the O2 injection lance system are investigated using computational fluid dynamics (CFD).The reformed gas enters into the horizontal cylindrical tube with diameter of 0.96 m and length of 7m.The O2 injection lance penetrates the cylindrical tube and the O2 exit is located at centre of the tube.The nozzle diameter at O2 exit is 3 cm.Reynolds-averaged Navier-Stokes (RANS) coupled with the shear stress transport (SST) k- turbulence model is used to simulate the turbulent flow (Reynolds number at O2 inlet ~ 10 6 ).The inlet mass flow rate and temperature of O2 and reformed gas are 0.66 and 19.7 kg/s, 303 K and 1163 K respectively.The reformed gas at the inlet is composed of 4.89 vol % CO2, 15 vol % CO, 67 vol % H2, 1.71 vol % H2O, 10.76 vol % CH4, 1.11 vol % N2.The CO, H2, CH4 combustion and water gas shift reactions are implemented [1].Further details of the geometry and the model will be presented in the conference.Due to penetration of the lance into the flow path of reformed gas, a low-pressure region is created in the latter upper part of lance region and the flow field predicted is inclined towards the upper region.The CO, H2, CH4 combustion reactions led to an increase in the spot temperature up to 4950 K.However, the predicted outlet temperature averaged across the pipe cross section is 1270 K. Further, due to dominant backward water-gas shift reaction the CO at the outlet increased from 15 vol % to 17.83 %.Further details of the effect of flow variables and nozzle design on the gaseous mixing, reaction rates, temperature and species distribution, flame stability (i.e., flashback and flame lifting), and outlet composition will be presented in the conference.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».