STUDYING THE POSSIBILITY OF USING COHERENT TYPE NOZZLES FOR BOF BLOWING AT THE GAS DYNAMIC SIMULATION STAND
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
Introduction. The BOF technology is the leading one in the production of structural steel due to its undeniable advantages.Problem Statement. In the conditions of most Ukrainian converter shops, when the blowing parameters change significantly during the campaign (temperature of the lining, dimensions of the workspace, quality of scrap metal, temperature and composition of iron), and the bath is blown at a constant flow rate with conventional Laval nozzles, sometimes it is impossible to ensure a stable purging process with high rate of post-combustion of CO up to CO2. Therefore, one of the main problems of oxygen conversion is the improvement of the designs of blowing devices, in particular, the nozzles.Purpose. The purpose of this research is to study the possibility of using nozzles of the coherent type for the top oxygen blowing of the converter.Material and Methods. In the research, we have used samples of coherent-design laboratory nozzles having different central part-to-periphery ratio under fixed equal general conditions of jet output (percentage of the annular gap to the total area of the nozzle, %: 75, 65, 50, 45, 35, 25). They have been studied by calculating the jet momentum, through weighing and taking shadow shots when the gas flow velocity reaches 2 M. The results have been compared with those for the cylindrical nozzle.Results. When the gas is supplied at 2 M, the coherent-type nozzles with a fraction of the outer part of 65—75% contribute to the formation of 1.5—1.6 times wider jets as compared with the cylindrical nozzle, with a multinode structure. It helps to increase the jet momentum by 45—55%.Conclusions. The design of a coherent type nozzle with an outer part share of 75% can be recommended to be used as the second tier or the second level nozzles of the top oxygen lance for post-combustion in an oxygen converter due to an increase in the surface area of the jet contact. The efficiency of post-combustion of CO from waste converter gases is expected to increase due to the increasing reaction surface area of additional oxygen jets.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,002 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,002 |
| Études des sciences et des technologies | 0,001 | 0,001 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle