Effect of friction stir welding parameters on microstructure and mechanical properties of the dissimilar alloys of AZ91D and AA7075
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
Friction stir welding is an efficient joining process for light metal alloys, offering benefits such as high joint efficiency and reduced grain sizes. This work is to investigate the process parameters that can improve the welding quality and reduce the brittle intermetallic compounds, including Al 3 Mg 2 (β) and Al 12 Mg 17 (γ) in the welded region. It was perceived that the process parameters influenced the morphological characteristics and input heat, thereby affecting the materialization of intermetallic compounds. The primary diffraction peaks of both Al and Mg were present in all the joints. Two specific intermetallic phases, Al 3 Mg 2 and Al 12 Mg 17 , were formed as a result of the diffusion of Al and Mg atoms during welding. These intermetallic compounds were found in all the joints. The Al 12 Mg 17 phase, when mixed with the Mg phase, tended to migrate towards the weld surface where the AZ91D plate was positioned. This migration might lead to constitutional liquation, which refers to the melting of specific phases during solidification, resulting in the materialization of eutectic microstructures. The highest ultimate tensile strength (UTS) value of 116.64 MPa was achieved with a rotational tool speed of 800 r/min and a traverse speed of 20 mm/min. On the other hand, the lowest UTS value of 68.32 MPa was observed with a rotational tool speed of 400 r/min and a traverse speed (TS) of 20 mm/min. It was noted that lower UTS values were associated with the materialization of dense layers of intermetallic compounds (Al 12 Mg 17 and Mg + Al 12 Mg 17 ) in the stir zone when using lower rotational tool speed and TS. It suggests that improper processing parameters can lead to the materialization of intermetallic compound in the stir zone, which subsequently decreases the mechanical properties of the weldments.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,001 | 0,002 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,001 | 0,000 |
| Bibliométrie | 0,000 | 0,001 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,001 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,001 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle