Inelastic mechanical behaviour of an additively manufactured titanium alloy: a statistical continuum mechanics theory perspective
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
Abstract Statistical continuum mechanics theory was used to simulate the inelastic stress of polycrystalline materials using two-point statistics. For the experimental part, the Electron beam melting (EBM) technique (Arcam EBM Q10 additive machine) was used to fabricate cylindrical rods of Ti-6Al-4V both in horizontal and vertical directions. Electron backscatter diffraction (EBSD) technique was employed to achieve statistically reliable orientation maps of vertically and horizontally printed samples. In this study, high strain rate compression tests at six different strain rates were performed, and the stress–strain curves were generated. This work is amongst the first attempts to model the microstructure of additively manufactured hexagonal alloys under compressive loadings using the statistical continuum mechanics theory. The model is capable of simulating reasonably large microstructures (statistically representative) with a practical computational cost and accuracy, unlike numerical models that require a high computational cost. It should be noted that in additive manufacturing, due to large grains and high anisotropy, microstructures used in the simulations should be large enough to include sufficient information from the material’s structure. Therefore, using finite element models would be very challenging here. On the other hand, the statistical continuum mechanics theory uses the statistical representation of the material’s characteristics for solving the governing equations with Green’s function that enables this methodology to use more microstructure characteristic information without having a noticeable change to the computational cost. The proposed model in this study uses different microstructure characteristics such as crystal grain orientation, total slip systems, active slip systems, gain morphology, and chemical phases that are obtained from EBSD images for simulating the inelastic mechanical behavior of polycrystalline materials. Although this model simulates polycrystalline materials by considering various crystal and grain information, unlike numerical methods, it doesn’t simulate the grain interactions well and we cannot study local deformation and crack nucleation sites. This model works very well for simulating the overall behavior of material instead of each individual grain and failure analysis. This model has shown a good combination of computational cost and accuracy in which the error between the simulated and experimental strength for vertical and horizontal samples was 6.21% and 8.07%, respectively.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,002 | 0,002 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,001 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,001 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle